2-3 weeks
Industrial Modbus TCP to HART Converter.
The HRT-711 is a new Modbus/TCP to HART Gateway. It allows the Modbus/TCP Master to access the HART Slave devices. These HART devices may be a transmitter, an actuator, a current output device and so forth. By using the HRT-711, users can integrate their HART devices into Modbus network easily. Therefore, HRT-711 can be a powerful gateway to exchange the data between Modbus and HART network. Moreover, the HRT-711 can be applied in the various hard environments because its high isolation protection designs. This design makes users to apply widely application for the remote data acquisition, control, process automation, and factory automation, etc.
Features:
- HART (Master) to Modbus TCP (slave) Gateway
- Allows two Modbus TCP Clients
- Connect up to 15 HART modules
- Working in point-to-point or multi-drop HART mode
- Support HART Short/Long frame
- Support HART Burst mode
- Firmware update via Com Port
- Built-in Watchdog
- Replacement of HART devices during on-line operations
- Mountable on DIN Rail
Manufacturer's warranty: 12 months
General technical parameters | |
Ethernet | 1x 10/100BaseT(X) |
HART ports | 1x HART |
Serial port | 1x RS-232 |
Protocol support | HART, Modbus TCP |
Industrial grade | |
Operating temperature | -25°C to 75°C |
Input voltage | 10~30VDC |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!