3-4 days
Industrial CANopen to KNX converter, housing type B (wide), DIN rail mount.
HD67804 is a CANopen / KNX Converter and it allows you to connect some CANopen devices with a KNX net (for example light switches, actuators, etc). Converter is easy to configure thanks to free SW67804 software.
Configuration:
Thanks to the SW67804 software on your PC you can:
- Define the parameters of CANopen line
- Define the parameters of KNX line
- Define the KNX messages that the Converter can accept
- Define the KNX frames that the Converter sends through the KNX line
- Define the map of KNX byte that must be written in the CANopen side
- Define the map of which CANopen data must be written in KNX messages
- Update the device
Characteristics:
- Up to 1440 bytes in reading and 1440 bytes in writing
- Triple isolation between KNX - Power Supply, KNX - CANopen, CANopen - Power Supply
- Bi-directional information exchange between KNX bus and CANopen bus
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 1x KNX; 1x CAN
- KNX protocol: KNX TP
- CAN protocol: CANopen
- Data Rates KNX: 9600 bit/s
- Data Rates CAN: Up to 1 Mbps
- KNX connector: KNX Bus connector
- CAN connector: 3 way 5mm terminal block
- Power supply: 8~24VAC; 12~35VDC
- Power supply connector: 2way 5mm terminal block
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67804
- ORDER CODE: HD67804-KNX-B2
Configurator – Software SW67804 FREE DOWNLOAD
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
