3-4 days
Industrial CAN 2.0 to Modbus RTU slave (RS232 or RS485) industrial converter, housing type A (slim), DIN rail mount.
HD67012 allows you to connect a CAN network with a Modbus Master (for example a PLC, HMI, etc.) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67012 software.
Configuration:
Thanks to SW67012 software on your PC, you can:
- Define that the CANbus frame of the CANbus are reading from Modbus
- Define that the CANbus frame of the CANbus are writing from Modbus
Characteristics:
- Two-directional information between networks CAN and Modbus
- Electrical isolation between two BUSes
- Write/read Modbus word from CAN frame
Specifications:
- Ports: 1x CAN 2.0; 1x RS-485; 1x RS-232
- CAN 2.0 connector: Terminal block
- RS-485 connector: Terminal block
- RS-232 connector: D-SUB9
- Data Rates CANopen: From 10K to 1Mbps
- Data Rates Modbus: Up to 115 Kbps
- Power supply: 10...19VAC; 10...35VDC
- Operating temperature: -40°C/+85°C (-40°F/+185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67012
- ORDER CODE: HD67012
Configurator - Software SW67012 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
CAN ports | 1x CAN |
Serial port | 1x RS-485, 1x RS-232 |
Protocol support | CAN, Modbus RTU |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 10~19VAC, 10~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!