3-4 days
Industrial J1939 to Modbus master converter, housing type: B, Galvanic Isolation: 1KV
The HD67050 is a J1939 to Modbus master Converter and it allows you to connect some Modbus RTU slaves with an existing J1939 network.
Configuration:
Thanks to the SW67050 software on your PC you can:
- Define the communication parameters of two lines
- Define the J1939 frames
- Define which Modbus Registers read
- Update the Firmware and/or Project
Characteristics:
- Baud rate changeable with software
- Electrical isolation (1000V) between two buses
- It allows to read, through J1939 frames, the data that the Gateway ask to Modbus devices
- 35 mm DIN rail mount
Specifications:
- Ports: 1xJ1939; 1xRS485; 1xRS232
- J1939 connector: Terminal block
- RS-232 connector: D-SUB9
- Data Rates J1939: 250 Kbps
- Data Rates Modbus: Up to 115 Kbps
- Power supply: 10...19VAC; 10...35VDC
- Operating temperature: -40°C/+85°C (-40°F/+185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67050
- ORDER CODE: HD67050M
Configurator - Software SW67050 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
CAN ports | 1x CAN |
Serial port | 1x RS-485, 1x RS-232 |
Protocol support | Modbus RTU, J1939 |
Industrial grade | |
Optoisolation | 1000V |
Operating temperature | -40°C to 85°C |
Input voltage | 10~19VAC, 10~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!