3-4 days
Industrial Modbus RTU slave to SNMP manager converter, housing type A (slim), DIN rail mount.
HD67175 allows you to connect a Modbus Master net (for example a PLC, SCADA System, etc) with a SNMP Agent net in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67175 software.
Configuration:
Thanks to the SW67175 software on your PC you can:
- Define the parameters of SNMP line
- Define the parameters of Modbus RTU line
- Define the SNMP requests to send to the SNMP Agents
- Update the device
Characteristics:
- Up to 2000 bytes in reading and 2000 bytes in writing
- 35mm DIN rail mount
- Isolation between Power Supply – Ethernet, Ethernet – Serial, Power Supply - Serial
- Bi-directional information exchange between the Modbus RTU and SNMP buses
Specifications:
- Ports: 1x Ethernet; 1x RS-232; 1x RS-422
- Modbus protocol: Modbus slave
- Data rates Modbus: Up to 115200 bps
- Data rates SNMP: 10/100 Base-T Autosensing
- Modbus Connector: D-sub connector, type DE-9 Male; 4way 5mm terminal block
- SNMP Connector: RJ45
- Power Supply Connector: 2way 5mm terminal block
- Power Supply: 8 ~ 24VAC; 12 ~ 35VDC
- Operating temperature: -40°C/+85°C (-40°F/+185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (LxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- SOFTWARE: SW67175
- ORDER CODE: HD67175-232-422-A1
Configurator - Software SW67175 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
Ethernet | 1x 10/100BaseT(X) |
Serial port | 1x RS-232, 1x RS-422 |
Protocol support | Modbus RTU, SNMP |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!