3-4 days
The HD67766-A1 is a IEC61850 Client / Modbus TCP Slave converter.
<HD67766-A1 allows you to connect a IEC 61850 Client network (for example a SCADA, HMI etc..) with a Modbus TCP Master in order to exchange informations between the Modbus TCP Master (for example a PLC, etc..) and the IEC61850 network.
Configuration:
You need Compositor SW67766 software on your PC in order to perform the following:
- Define the parameters of the IEC61850
- Define the parameters of the Modbus TCP
- Define IEC61850 variables to be read by the Modbus master
- Define IEC61850 variables to be written by the Modbus master
- Update the device
Characteristics:
- Up to 1500 bytes in reading and 1500 bytes in writing
- Two-directional information between Modbus TCP and IEC61850
Specifications:
- Wide power supply input range: 8...24V AC or 12...35V DC
- Wide temperature range: -40°C / 85°C [-40°F / +185°F]
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mountable on 35mm Rail DIN
- Software: SW67766
Configurator – Software SW67766 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
Ethernet | 2x 10/100BaseT(X) |
Protocol support | IEC 61850, Modbus TCP |
Industrial grade | |
Casing | Plastic |
IP rating | IP20 |
Operating temperature | -40°C to 85°C |
Manufacturer's warranty | 24 months |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!