3-4 days
Industrial PROFINET to Modbus TCP slave converter, housing type: A (slim), DIN rail mount.
HD67612 allows you to connect a PROFINET net (for example a SIEMENS PLC, etc) with a Modbus TCP Master net (for example a PLC, SCADA System, etc) in order to exchange the informations between the networks. Gateway lets to connect maximum one PROFINET master with Modbus TCP network. Converter is easy to configure thanks to free SW67612 software.
Configuration:
Thanks to the SW67612 software on your PC you can:
- Define the parameters of PROFINET line
- Define the parameters of Modbus TCP line
- Generate the GSDML file to be imported on the master PROFINET
- Update the device
Characteristics:
- Mountable on 35 mm DIN rail
- Up to 1440 bytes in reading and 1440 bytes in writing
- Bi-directional information exchange between Modbus TCP bus and PROFINET bus
- Triple isolation between Modbus - Power Supply, Modbus - Ethernet, Power Supply - Ethernet
Specifications:
- Ports: 2x Ethernet
- Data Rates Ethernet: 10/100 Base-T Autosensing
- Ethernet connector: RJ45
- Power supply: 8...24VAC; 12...35VDC
- Operating temperature: -40° to +85° (-40°F to +185°F)
- Dimensions: 71x60x95 (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67612
- ORDER CODE: HD67612-A1
Configurator – Software SW67612 FREE DOWNLOAD
General technical parameters | |
Ethernet | 2x 10/100BaseT(X) |
Protocol support | PROFINET, Modbus TCP |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!