3-4 days
Industrial J1939 to Modbus RTU master converter, housing type: A (slim), galvanic isolation 1000V, DIN rail mount.
HD67050 allows you to connect some Modbus RTU slaves with an existing J1939 network. Converter is easy to install and configure thanks to free SW67050 software.
Configuration:
Thanks to the SW67050 software on your PC you can:
- Define the communication parameters of two lines
- Define the J1939 frames
- Define which Modbus Registers read
- Update the Firmware and/or Project
Characteristics:
- Baud rate changeable with software
- Electrical isolation (1000V) between two buses
- It allows to read, through J1939 frames, the data that the Gateway ask to Modbus devices
- 35 mm DIN rail mount
Specifications:
- Ports: 1x CAN; 1x RS-485; 1x RS-232
- J1939 connector: Terminal block
- RS-232 connector: D-SUB9
- Data Rates J1939: 250 Kbps
- Data Rates Modbus: Up to 115 Kbps
- Power supply: 10...19VAC; 10...35VDC
- Operating temperature: -40°C/+85°C (-40°F/+185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- ORDER CODE: HD67050
Configurator - Software SW67050 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
CAN ports | 1x CAN |
Serial port | 1x RS-485, 1x RS-232 |
Protocol support | Modbus RTU, J1939 |
Industrial grade | |
Optoisolation | 1000V |
Operating temperature | -40°C to 85°C |
Input voltage | 10~19VAC, 10~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!