HD67810-KNX-B2
3-4 days
Industrial J1939 to KNX TP converter, housing type B (wide), DIN rail mount.
HD67810-KNX-B2 allows to connect J1939 devices like engines/motors (for example CAT, Cummins, Iveco) with KNX net (light switches, actuators). Converter is handy to use and easy to configure through free software SW67810.
Configuration:
Thanks to the SW67810 software on your PC you can:
- Define the parameters of J1939 line
- Define the parameters of KNX line
- Define the KNX messages that the Converter can accept
- Define the KNX frames that the Converter sends through the KNX line
- Define the map of KNX byte that must be written in the J1939 side
- Define the map of which J1939 data must be written in KNX messages
- Update the device
Characteristics:
- Up to 1440 bytes in reading and 1440 bytes in writing
- Triple isolation between KNX - Power Supply, KNX - J1939, J1939 - Power Supply
- Bi-directional information exchange between KNX bus and J1939 bus
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 1x KNX; 1x CAN
- KNX protocol: KNX TP
- CAN protocol: J1939
- Data Rates KNX: 9600 bit/s
- Data Rates CAN: Up to 1 Mbps
- KNX connector: KNX Bus connector
- CAN connector: 3way 5mm terminal block
- Power supply: 8...24VAC; 12...35VDC
- Power supply connector: 2way 5mm terminal block
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67810
- ORDER CODE: HD67810-KNX-B2
Configurator – Software SW67810 FREE DOWNLOAD
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
