HD67082-B2-169MHz-40

Industrial MBus Wireless to Modbus RTU slave converter. Support up to 40 MBus slaves and 32 MBus Wireless slaves, wM-Bus @ 169Mhz, S1&T1 supported, housing type B (wide), DIN rail mount.

HD67082-B2-169MHz-40 allow to monitor some MBus Wireless meters (like Engelmann, Amber-Wireless, Maddalena, Siemens, exc. meters) with a Modbus net (like a PLC, a PC exc).

New converter functionality - automatic scan of MBus receivers

There is no longer need to consult the manufacturer or analyze the protocol frame from the MBus counter - everything will be handled for you our dedicated software SCAN&DECODE!

To facilitate the installation of already easy-to-use ADFweb MBus converters, the manufacturer has developed dedicated software that automatically scans the MBus and decodes all the registers contained in the telegram. In practice, this means fast installation of converters and trouble-free system setup.

SCAN&DECODE - quick manual

We have also provided you with a very brief description of the functionality, which is available for download at the CONSTEEL Electronics store documentation.

Configuration:

Thanks to the SW67082 software on your PC you can:

• Define the parameters of MBus and Wireless MBus line
• Define the parameters of Modbus line
• Define which M-Bus variables are readable on Modbus
• Update the device

Characteristics:

• Electrical isolation between Serial and MBus
• Baud Rate and Parity changeable with software
• Available wM-Bus frequency: 169 MHz, 433 MHz or 868 MHz (in relation to the order code)
• 35mm DIN rail mount

Specifications:

• Ports: 1x MBus Wireless; 1x MBus; 1x RS485
• MBus Wireless protocol: MBus Wireless, S1&T1 communication
• MBus protocol: M-Bus Master
• Modbus protocol: Modbus RTU slave
• MBus Wireless frequency: 169 MHz
• Data Rate MBus: Up to 38400 bit/s
• Data Rate Modbus: Up to 115200 bit/s
• MBus Wireless connector: SMA Female Antenna
• MBus connector: 2way 5mm terminal block
• Modbus connector: 3way 5mm terminal block
• Power supply: 15...21VAC; 18...35VDC
• Power supply connector: 2way 5mm terminal block
• Operating temperature: -40°C/+85°C (-40°F/+185°F)
• Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
• Maximum power consumption at converter start-up: 30W
• Weight: 200g approx
• Mechanical fixing: DIN Rail mount
• Software: SW67082
• ORDER CODE: HD67082-B2-169MHz-40

Manufacturer's warranty: 24 months

---