Industrial USB to RS-232 Converter. The I-7560/I-7560U provides a Windows serial COM port via it's USB connection and is compatible with new and legacy RS-232 devices. USB Plug-and-Play allows easy serial port expansion and requires no IRQ, DMA, or I/O port settings manually.It also features a full set of RS-232 modem data and control signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI and GND) on it's PC compatible DB-9 male connector. It also featur..
Industrial media converter, Ethernet to fiber, DIN rail mount, working temperature -40°C to 75°C. 5 years manufacturer's warranty. 1 port 10/100Base-T(X) and 1 port 100Base-FX, Single-mode, SC/ST DC12~48V. IMC100 series are unmanaged industrial media converters. This series have 14 productsand support a variety of optional interfaces including 100M fiber ports, 100M copper ports,Gigabit fiber ports, Gigabit copper ports and Gigabit SFP. They adop..
MBus to RS-232 converter (Master MBus: up to 3 slaves), housing type B (wide), DIN rail mount. This series allow to read/write M-Bus Slaves devices by RS232, ensuring galvanic isolation between M-Bus and RS232. HD67020 is a Plug&Play device and it allows to connect up to 3 M-Bus Slaves to RS232. The converter does not require any configuration. The baudrate is automatically detected at RS232 side and used (the same) to the M-Bus side.Characte..
Industrial optoisolated (2000V) USB (type B) to RS-485 converter (3-way terminal block), power supply through USB port, housing type B (wide), DIN rail mount. The USB/RS485 converter is a cost-effective device for transfer serial data over USB. Connecting to a USB port on a computer or USB hub, this device instantly add serial communication ports to your system. By plugging the device into the USB port, it is automatically detected and installed...
2-port 10/100Base-T(X)+1-port 100Base-FX, Multi-mode. IMC100 series are unmanaged industrial media converters. This series have 14 productsand support a variety of optional interfaces including 100M fiber ports, 100M copper ports,Gigabit fiber ports, Gigabit copper ports and Gigabit SFP. They adopt DIN-Rail mounting tomeet the requirements of different application scenes. Product supports optional AC/DC power supply. The DIP switch could implem..
Industrial, 2-port RS-422/485 serial device server with one Ethernet port. High performance, industrial grade 2-port serial to Ethernet server, it can satisfy some kinds of customer requirements in consumption, temperature, volume and handle ability. It provides 2 port RS-485/422 (RS-485/422 connector: 5 bit terminal block) and 1 port 10/100Base-Tx Ethernet, can focus manage disperse serial device, master through network, easy, convenience. In ap..
Industrial Isolated RS-232 to RS-485 Converter. The tM-7510U repeater simply amplifies, or boosts, existing RS-485 signals to enable them to cover longer distances. It extends the communication distance by 4000 ft. (1200 m) or increases the maximum number of bus nodes. The module provides 2500 VDC of isolation allowing you to separate and protect critical segments of the system from the rest of the RS- 485 network.The tM-7510U provides 2 modes of..
Industrial Isolated RS-232 to RS-485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change an..
2-port 10/100Base-T(X)+1-port 100Base-FX, Single-mode. IMC100 series are unmanaged industrial media converters. This series have 14 productsand support a variety of optional interfaces including 100M fiber ports, 100M copper ports,Gigabit fiber ports, Gigabit copper ports and Gigabit SFP. They adopt DIN-Rail mounting tomeet the requirements of different application scenes. Product supports optional AC/DC power supply. The DIP switch could imple..
Industrial RS-232 to Isolated RS-485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change an..
Isolated RS-232 to 4 Channels RS-485 Converter. RS-485 Active HubThe I-7520U is isolated RS-232 to 4-ch RS-485 active star wiring hub, it has 4 independent RS-485 output channels and one RS-232 input channel. Each output channel is equipped with an individual driver. The data from a master to the input channel will simultaneously be forwarded to all the four output channels.Baud Rate SettingThe I-7520U provides 2 modes of baud rate setting, one i..
Modbus TCP/RTU/ASCII converter - Modbus Gateway with Ethernet interface. MOD-ETH is an innovative device that converts Modbus TCP to Modbus RTU / ASCII.The device has Ethernet and RS485 interface, 4 digital inputs with counters and 3 relay outputs. All inputs are isolated from logic using optocouplers.Up to 128 Modbus I / O Modules (SFAR: SLIM, MINI, STANDARD and other manufacturers) can be connected to the MOD-ETH via the RS485 interface. The da..