USB to Isolated RS-485 Converter. The tM-7561 is a cost-effective USB to RS-485 converter. Connecting the tM-7561 to a PC, you get one RS-485 port that allows you to access RS-485 devices through the USB interface. Like the I-7520, the tM-7561 contains "Self-Tuner" chip auto-tunes the baud rate and data format to the RS-485 network. The tM-7561 module derives its power from the USB port and doesn't need external power adapter.Features:USB 1.1/2.0..
Industrial Isolated RS-232 to RS-232 Converter. The I-7551 Photo coupler provides a complete full-duplex (including control signal) electrical isolation channel between two RS-232 devices. This isolation is an important consideration if a system uses different power sources, has noisy signals, or must operate at different ground potentials.The I-7551 provides the option of reconfiguring which control signal is used. CTS can be selected instead of..
Industrial Isolated RS-232 to RS-422/485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to chang..
MBus to RS-232 converter (Master MBus: up to 10 slaves), housing type B (wide), DIN rail mount. This series allow to read/write M-Bus Slaves devices by RS232, ensuring galvanic isolation between M-Bus and RS232. HD67020 is a Plug&Play device and it allows to connect up to 10 M-Bus Slaves to RS232. The converter does not require any configuration. The baudrate is automatically detected at RS232 side and used (the same) to the M-Bus side.Charac..
Industrial isolated RS-485 repeater, I-7510 by ICPDAS. Repeaters for RS-485 buses such as the I-7510 are used to extend the network range and increase the number of nodes that can be connected to a single bus. With repeaters, the limitations of a standard RS-485 bus, such as maximum cable length and number of devices, can be overcome. Features of RS-485 repeaters:Range extension: They amplify the data signal, allowing transmission over longe..
Industrial Modbus TCP to RTU/ASCII Converter with PoE and 1 RS-232 Port. The tGW-700 is a Modbus TCP to RTU/ASCII gateway that enables a Modbus/TCP host to communicate with serial Modbus RTU/ASCII devices through an Ethernet network, and eliminates the cable length limitation of legacy serial communication devices. The module can be used to create a pair-connection application (as well as serial-bridge or serial-tunnel application), and can then ..
Industrial Modbus RTU / ASCII gateway to Modbus TCP. Communication ports RS-485/422 and Ethernet, wide temperature range, metal housing IP40.GW1101-1D(RS-485)-TB-P(12-48VDC) is Modbus gateway designed for integrating Modbus RTU/ASCII and Modbus TCP networks; it can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocols. This product has 1 RS-485/422 serial port and 1 100M Ethernet copper port. It adopts wall mounting to meet the..
Industrial Modbus RTU / ASCII gateway to Modbus TCP. Communication ports 485 and Ethernet 100MGW1101-1D(RS-485)-DB-P(12-48VDC) is Modbus gateway designed for integrating Modbus RTU/ASCII and Modbus TCP networks; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocols. This product supports 1 RS-485 serial port to 1 100M Ethernet copper port. It adopts wall mounting to meet the requirements of different application scenes..
RS-232 to isolated RS-422/485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change any hardw..
Industrial PoE Splitter. The NS-200PS plays the role of PD, and splits the data signal and power signal that are transmitted from the PSE. The NS-200PS plays a dual role of providing power to industrial devices, and enabling Ethernet connections.Features:One channel power splitterSupports 10/100/1000 Base-TX for PoE in and Data outIEEE 802.3af compliant split power/data from PoE equipmentPower isolation and short circuit protection for power outp..
Industrial Modbus TCP to RTU/ASCII Converter with PoE and 2 RS-232 Ports. The tGW-700 is a Modbus TCP to RTU/ASCII gateway that enables a Modbus/TCP host to communicate with serial Modbus RTU/ASCII devices through an Ethernet network, and eliminates the cable length limitation of legacy serial communication devices. The module can be used to create a pair-connection application (as well as serial-bridge or serial-tunnel application), and can then..
Industrial media converter, Ethernet to fiber, DIN rail mount, working temperature -40°C to 75°C. 5 years manufacturer's warranty. 1 Gigabit Copper port and 1 Gigabit SFP port.IMC100 series are unmanaged industrial media converters. This series have 14 productsand support a variety of optional interfaces including 100M fiber ports, 100M copper ports,Gigabit fiber ports, Gigabit copper ports and Gigabit SFP. They adopt DIN-Rail mounting tomeet the..