ET-2242 CR




Warranty 12 months
2-3 weeks




ET-2242 CR
- Stock: 2-3 weeks
- Brand: ICPDAS
- Model: ET-2242 CR
982,30 zł
2 pieces or more 952,83 zł
5 pieces or more 923,36 zł
10 pieces or more 893,89 zł
26 pieces or more 864,42 zł
51 pieces or more 834,96 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.
By the same series
Brand: Aspar
Model: SDM-8AI
Industrial expansion module, 8 universal analog inputs to Modbus RTU, with RS485 interface.Features:INPUT: 8 universal analog inputsOUTPUT: RS485 - Mo..
963,50 zł
Brand: Aspar
Model: SDM-8AO
Industrial expansion module, 8 analog universal outputs on Modbus RTU, with RS485 interface. Features:OUTPUT: 8 universal analog outputsINPUT: RS485 -..
963,50 zł
Brand: ICPDAS
Model: ECAT-2050 CR
EtherCAT Slave I/O Module with Isolated 4-ch Source or Sink type Digital Outputs and 13-ch Digital Inputs. The ECAT-2000 is equipped with the EtherCAT..
991,70 zł
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates (if available for the model)
- Test Reports (if available for the model)
Ethernet I/O Module with 2 Ethernet Ports and 16 Open Collector Digital Outputs.
Providing various digital I/O functions, the ET-2242 module is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP/UDP protocol. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the ET-2242 module perfect integration with the HMI, SCADA, PLC and other software systems. The ET-2242 provides 16 Digital Output channels, each of which features photo couple isolation. The ET-2242 supports sink type output with short circuit protection and each channel can drive 650 mA load. There are configurable power-on and safe values for Digital Output. With 2 Ethernet ports, the ET-2242 allows daisy chain connection which permits the flexibility in locating devices, eases installation and lowers infrastructure costs. It features 8 kV ESD protection, 4 kV EFT protection, 3 kV surge and 3000 VDC I/O isolation are also provided to enhance noise protection capabilities in industrial environments.
The module can be used to create DI to DO pair-connect through the Ethernet. After configuration, the ET-2242 module can poll the status of the local DI channels and then use the Modbus/TCP protocol to continuously write to the remote DO devices. It is equipped with removable terminal block connector for easy and robust wiring in industrial situations, and features a powerful 32-bit ARM MCU to handle efficient network trafficking.
Features:
- Built-in Web Server
- Support Modbus TCP/UDP Protocols
- Powerful 32-bit MCU Handles Efficient Network Traffic
- 2-port Ethernet Switch (LAN Bypass) for Daisy-Chain Wiring
- Dual Watchdog
- I/O Pair Connection (Push and Polling)
- Supports web configuration and firmware update via Ethernet
- 16 open collector digital output channels
- Wide Operating Temperature Range: -25°C ~ +75°C
Manufacturer's warranty: 12 months
Certificates: CE, FCC
| General technical parameters | |
| Ethernet | 2x 10/100BaseT(X) |
| I/O | 16x digital outputs |
| Protocol support | Modbus TCP |
| Industrial grade | |
| Optoisolation | 1500 VDC, 3000 VDC |
| Operating temperature | -25°C to 75°C |
| Input voltage | 10~30VDC |
| Mount | DIN rail |
1

