HD67606-A1

Industrial PROFINET to CAN converter, housing type A (slim), DIN rail mount.

HD67606 allows to connect PROFINET devices (for example Siemens PLC) with CAN network. Converter is easy to install and configure thanks to SW67606 software.

Configuration:

Thanks to the SW67606 software on your PC you can:

• Define the parameters of PROFINET line
• Define the parameters of CAN line
• Define the CAN frames that the Converter can accept
• Define the CAN frames that the Converter sends through the CAN line
• Define the map of CAN byte that must be written in the PROFINET array
• Define the map of which PROFINET bytes must be written in CAN frames
• Update the device

Characteristics:

• Mountable on 35 mm DIN rail
• Up to 1440 bytes in reading and 1440 bytes in writing
• Bi-directional information exchange between CAN bus and PROFINET bus
• Triple isolation between CAN - Power Supply, CAN - Ethernet, Power Supply - Ethernet

Specifications:

• Ports: 1x CAN; 2x PROFINET
• Data Rates CAN: Up to 1Mbps
• Data Rates PROFINET: 100 Base-T Autosensing
• CAN connector: 3way 5mm terminal block
• PROFINET connector: RJ45
• Power supply: 8~24VAC; 12~35VDC
• Power supply connector: 2 way 5mm terminal block
• Operating temperature: -40° to +85° (-40°F to +185°F)
• Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
• Weight: 200g approx
• Mechanical fixing: 35mm DIN Rail mount
• Software: SW67606
• ORDER CODE: HD67606-A1

Configurator – Software SW67606 FREE DOWNLOAD

---