MOD-16RO

Industrial expansion module, 16 relay outputs on Modbus RTU, with RS485 interface.

Features:

• OUTPUT: 16 relay outputs
• INPUT: RS485 - Modbus Slave (ASCII, RTU)
• Mount: DIN rail
• Domyślnie (konfigurowalne) stany wyjść po włączeniu zasilania
• Maximum current 3A 250V AC / per COM (module has 4 terminals COM: COM1, COM2, COM3, COM4)
• Maximum current 3A 30V DC / per COM (module has 4 terminals COM: COM1, COM2, COM3, COM4)
• LEDs for signaling the status of outputs, module power and transmission
• Watchdog function
• Large, convenient cable connectors (up to 2.5 mm2)
• Configuration: free software
• 2 years warranty
• Made in Poland

The MOD-16RO is an innovative device that provides a simple and inexpensive extension of high current output currents.

The module communicates with all commercially available PLCs, devices that support the popular MODBUS MASTER protocol.

The device has 16 relay outputs.

This module is connected to the RS485 bus via two wire twisted pair. Communication is made using the MODBUS RTU or MODBUS ASCII protocol. The use of a 32-bit ARM core processor provides fast data processing and fast communication. The transmission speed is configurable from 2400 to 115200.

The module is designed for mounting on DIN rail according to DIN EN 5002.

The MOD-16RO features a set of LEDs used to indicate the status of outputs, module power and transmissions useful for diagnostics and troubleshooting purposes.

Configuration of the module is done via USB with a dedicated computer program. It is also possible to change parameters using the MODBUS protocol.

SLIM modules can be easily connected to each other via the Quick Connector. Just supply the module and RS485 power to the first module. With the MOD-QC tape, both values will be passed to the next modules.

Available accessories:

• Connecting tape: MOD-QC
• Programming cable: mini USB

---