Industrial Ethernet Switch with 4x Ethernet Ports and 1x Fiber Port. The NS-205AF/NSM-205AF is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions.The NS-205AF/NSM-205AF provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without ex..
Industrial RS-485/RS-232 to ZigBee Converter (Slave, ZigBee Router). The ZT-2550 and ZT-2551 series modules are small-sized wireless ZigBee converters based on the IEEE802.15.4 standard that allow RS-232, RS-485 interface to be converted to a personal area ZigBee network. The typical transmission of ICP DAS ZT series ZigBee products is 700 meters (LOS, line of sight), with a transmission frequency range of between 2.405 GHz and 2.48 GHz, separate..
Industrial Unmanaged Switch with 4 Ethernet ports and 1 Fiber port. The EISK5-100T/F Skorpion Switch is a five-port unmanaged Ethernet switch that provides 100 Mbps performance on all ports in order to accommodate a range of control devices and workstations commonly found in an automation project. Four of the ports are copper ports with RJ-45 connectors while one port is either a single-mode or multimode fibre port. For 10 Mbps legacy copper devi..
Industrial LTE router with Wi-fi hotspot, 4 Gigabit Ethernet ports, 2 antenna SMA ports, 2 DI, 2 DO, 1 relay output, optional: GPS, dual-sim with failover, balancing and bounding function.Four-Faith F-R200 is an intelligent gigabit cellular router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution management systems, metering etc. Software-d..
Industrial 4G Wireless Router with 1 100M WAN port, 2 100M LAN ports, 1 RS-232/485/422 serial port, 2 2.4G WIFI antenna interfaces, 2 LTE antenna interfaces, 2 SIM card slots. IRT5300L series are industrial 4G wireless routers. This series has two products, including 100M WAN port, 100M LAN port, RS-232/485/422 serial port, I/O interface (reserved), Wi-Fi antenna interface, LET antenna interface and SIM card slot. It adopts DIN-Rail mounting, whi..
Industrial 4G Wireless Router with 1 100M WAN port, 4 100M LAN ports, 1 RS-232/485/422 serial port, 2 2.4G WIFI antenna interfaces, 2 LTE antenna interfaces, 2 SIM card slots. IRT5300L series are industrial 4G wireless routers. This series has two products, including 100M WAN port, 100M LAN port, RS-232/485/422 serial port, I/O interface (reserved), Wi-Fi antenna interface, LET antenna interface and SIM card slot. It adopts DIN-Rail mounting, whi..
Industrial RS-485/RS-232 to ZigBee Converter (Host, ZigBee Coordinator). The ZT-2550 and ZT-2551 series modules are small-sized wireless ZigBee converters based on the IEEE802.15.4 standard that allow RS-232, RS-485 interface to be converted to a personal area ZigBee network. The typical transmission of ICP DAS ZT series ZigBee products is 700 meters (LOS, line of sight), with a transmission frequency range of between 2.405 GHz and 2.48 GHz, sepa..
Industrial Ethernet to Fiber Single-Strand Media Converter, TX 1310 nm, RX 1550 nm, SC connector. The NS-200WDM Series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, fiber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new fiber..
Industrial Ethernet to Fiber Single-Strand Media Converter, TX 1550 nm, RX 1310 nm, SC connector. The NS-200WDM Series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, fiber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new fiber..
Industrial Unmanaged 8-port Ethernet Switch with 10~30VDC Power Input and Metal Casing. The NS-208/NSM-108 has 8 Ethernet ports that support 10/100 Base-TX, with a 10/100M auto negotiation feature and auto MDI/MDI-X function.All Ethernet ports have memory buffers that support the store-and-forward mechanism, which assures that data can be transmitted properly. The NS-208/NSM-108 supports advanced network standards to optimize network performance,..
Industrial Ethernet Switch with 4 10/100Mbps ports, 1 Fiber port and 2 RS-232 ports. IES615-1F-2D (RS-232) is an industrial Ethernet switch with 4 10/100Mbps ports, 1 Fiber port and 2 RS-232 ports. It has integrated serial server functionality and redundant SW-Ring technology (recovery time <20ms). Users can easily set up redundancy to increase network reliability. In addition, the IES615-1F-2D supports the AT command board and 1 relay alarm o..
Industrial RS-232/422/485 to Fiber Converter, Single-Mode 15 Km, SC connector, TX 1310 nm, RX 1550 nm. The I-2542 series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, fiber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new fi..