2-3 days
Industrial expansion module, 4 digital outputs on Modbus RTU, with RS485 interface.
Features:
- OUTPUT: 4 digital outputs
- INPUT: RS485 - Modbus Slave (ASCII, RTU)
- Mount: DIN rail
- Outputs type PNP, 250mA
- Watchdog function
- Comfortable connectors for cables (up to 2.5 mm2)
- Configuration: free Modbus Configurator
- 2 years warranty
- Made in Poland
The MOD-4DO is an innovative device that provides a simple and inexpensive extension of the output lines of popular PLCs.
The module communicates with all commercially available PLCs, devices that support the popular MODBUS MASTER protocol.
The device has 4 digital outputs. Outputs are isolated from logic using optocouplers.
This module is connected to the RS485 bus via two wire twisted pair. Communication is made using the MODBUS RTU or MODBUS ASCII protocol. The use of a 32-bit ARM core processor provides fast data processing and fast communication. The transmission speed is configurable from 2400 to 115200.
The module is designed for mounting on DIN rail according to DIN EN 5002.
The module is equipped with a set of LEDs used to indicate the status of inputs useful for diagnostic purposes and to help identify errors.
Configuration of the module is done via USB with a dedicated computer program. It is also possible to change parameters using the MODBUS protocol.
General technical parameters | |
Serial port | 1x RS-485 |
I/O | 4x digital output |
Protocol support | Modbus RTU, Modbus ASCII |
Industrial grade | |
Operating temperature | -20°C to 65°C |
Input voltage | 12~24VDC |
Manufacturer's warranty | 2 years |
Mount | DIN rail |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!