Menu
Your Cart

PCI-826LU CR

PCI-826LU CR
PCI-826LU CR
PCI-826LU CR
PCI-826LU CR
PCI-826LU CR
2-3 weeks
PCI-826LU CR
PCI-826LU CR
PCI-826LU CR
PCI-826LU CR
PCI-826LU CR
PCI-826LU CR
  • Stock: 2-3 weeks
  • Brand: ICPDAS
  • Model: PCI-826LU CR
2 332,40 zł

Industrial Universal PCI card with 32-ch 16-bit Analog Input, 2-ch 16-bit Analog Output and 32-ch Programmable DIO, 250 kS/s.

The PCI-826LU is a high performance multifunction card providing high-speed analog I/O and digital I/O functions. The PCI-826LU card has a universal PCI interface supporting both 3.3 V and 5 V PCI bus. This card features a continuous, 250 k Samples/Sec 16-bit resolution A/D converter, 8 K samples hardware FIFO, 2-ch 16-bit D/A converter, 32-ch programmable digital I/O and DO read back.The PCI-826LU provides either 32-ch single-ended or 16-ch differential analog inputs which are jumper selectable. The PCI-826LU is equipped with a high speed PGA featuring programmable gain controls (1, 2, 4, 8).

The PCI-826LU has the Card ID switch and pull-high/pull-low resisters for DI on board. Users can set Card ID on a board and recognize the board by the ID via software when using two or more PCI-826LU cards in one computer. The pull-high/pull-low resisters allow specifying the DI status; when the DI channels are unconnected, the DI status will remain in high or low status other than floating.

The PCI-826LU provides two programmable trigger methods: software trigger and pacer trigger. The A/D channel scan function of PCI-826LU is so amazing, we call it MagicScan. The MagicScan controller takes out most works of getting A/D value such as select channel, set gain, settling time, trigger ADC and get data. With the built-in MagicScan and interrupt features, it is effectively off-loading your CPU from the job. Even in channel scan mode, it can have different gain code for each channel, and the sampling rate can still reach 250 kS/s totally. The PCI-826LU is suitable for high end applications.

Features:

  • Supports both +5 V and +3.3 V PCI bus
  • Card ID function
  • One A/D converter with maximum 250 k Samples/Sec
  • 16-bit resolution A/D converter
  • 8 K samples hardware FIFO
  • 32 single-ended/16 differential analog inputs
  • Two different A/D trigger: software trigger, pacer trigger
  • Programmable gain control, programmable offset control
  • 2-ch 16-bit voltage output
  • Voltage output range: +/-10 V, +/-5V, 0 ~ 10 V, 0 ~ 5 V
  • 32-ch programmable DI/DO
  • Pull high/pull low function on DI
  • DO status read back
  • High speed data transfer rate

Manufacturer's warranty: 12 months


Write a review

Note: HTML is not translated!
Bad Good
1

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.