PEX-DA8 CR
2-3 weeks
Industrial PCI Express Card with 8 Analog Outputs and 1x CA-4002 D-Sub connector.
The PEX-DA4/DA8/DA16 series analog output board supports PCI Express interface. It is equipped with 14-bit 4/8/16 analog output channels, and each of the D/A channels features double-buffered latch.
For the PEX-DA series, its voltage output range is from -10 V to +10 V, and the current output range is from 0 to 20 mA. In addition, PEX-DA series also features the following advantages:
Accurate and easy-to-use calibration
ICP DAS provides the software calibration, so that no jumpers and trim-pots are required anymore. The calibration data is saved in EEPROM for long-term use.
Individual channel configuration
Each channel can be individually confi gured as voltage output or current output.
Card ID
The PEX-DA series adds a Card ID switch for users to recognize the board by the ID via software when using two or more PEX-DA cards in one computer
Features:
- Supports +5 V PCI bus for PIO-DA4/DA8/DA16
- 16/8/4 channels, 14-bit analog output
- Voltage output range: ±10 V
- Current output range: 0 ~ 20 mA (sink)
- Two pacer timer interrupt source
- Double-buffered D/A latch
- Software calibration
- 16-channel DI, 16-channel DO
- One D-Sub connector, two 20-pin flat cable connectors
- Connects directly to DB-16P, DB-16R, DB-24C, DB-24PR and DB-24POR
Manufacturer's warranty: 12 months
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!