PCIe-PoE2+

2-Port PCI-E Gigabit Power over Ethernet Frame Grabber Card.

Neousys PCIe-PoE2+ is a x4 PCI Express GigE frame grabber card with PoE capability. PoE, or Power over Ethernet, is a technology to supply electrical power along with data on a standard Ethernet cable. PCIe-PoE2+ offers two PoE ports via independent Intel® 82574L Gigabit Ethernet controllers.

PCIe-PoE2+ is dedicatedly designed for PoE cameras. Each port can delivers 15.4 W of power and 1000 Mb/s bandwidth over a CAT-5/CAT-6 cable of up to 100 meters. It features 9 kB jumbo frame and link aggregation, which conduct exceptional performance for continuously receiving large amount of image data. And for your convenience, we design PCIe-PoE2+ with the capability of directly drawing power from PCI-E bus so no external 12 VDC is needed.

The PoE technology significantly reduces the installation and maintenance cost by eliminating the power wire. Combining PoE and the Gigabit bandwidth, PCIe-PoE2+ is the perfect fit for your vision application!

Features:

• x4 PCI Express® interface to support a total bandwidth of 1GB/s
• Supports 2 independent GigE Ports
• Compliant with IEEE 802.3af to deliver 15.4 W each port
• Supports 9 kB jumbo frame and link aggregation
• No external 12 VDC input needed

Specification:

• Bus Interface: x4 PCI Express
• Gigabit Ethernet Port: 2x Gigabit Ethernet ports by Intel® 82574L controllers, supporting 9 kB jumbo frame & link aggregation (teaming)
• PoE Capability: IEEE 802.3af compliant, each port delivers up to 15.4W
• Cable Requirement: CAT-5e or CAT-6 cable, 100 meters max
• Power Requirement:
• Maximal 1.6A @ 3.3V from PCI Express bus
• Maximal 2.8A @ 12V directly from PCI Express bus
• Operating Temperature: 0 ~ 60°C with air flow
• Dimension: 167.7 m (W) x 111.2 mm (H)

Warranty: 24 months

ORDERING INFORMATION: PCIe-PoE2+