Menu
Your Cart

RPM-416

RPM-416
2-3 days
RPM-416
Product Views: 9718
0,00 zł

Data logger RPM-416 is a microprocessor-based device intended for electrical parameters measuringand monitoring on the data logger display as well as data archiving.

The data archiving is made on the removable memory card (SD / MMC), which can be later analyzed bysoftware program RPM-416 Data Analysis (the program can be found on website www.novatek-electro.com),installed on the standard or portable PC.Data files have extension “RDF”.Data logger RPM-416 has an inbuilt real time clock with power from a lithium-type battery.RPM-416 can be connected to Ethernet network via standard 10Base-T or 100Base-T.

In this casesimultaneously with data recording to memory card, the RPM-416 configuration and data transmitting to thePC is possible.

The main possibilities of the data logger:

  • Multi-channeling – one data logger is sufficient for all working data receiving from the controlleddevice;
  • Uniwersalność – w rejestratorze przewidziano podłączenie dodatkowych modułów pozwalającychrozszerzyć spektrum sygnałów wejściowych (napięcie, prąd, temperatura, wejścia dyskretne i inne);
  • Galvanic separation – incoming signals of high voltage and current are galvanic separated fromother inputs which ensures easiness of data logger connection;
  • High fidelity – self-control system and data saving algorithm protect against data loss in case ofemergency situations (power supply failure);
  • Servicing convenience – four-lined symbolic display with illuminating enables to adjust the datalogger and monitor its work (the values of recorded incoming signals are shown on the display),the key-board is used for setting and control of the data logger;
  • Remote monitoring and configuration – if the data logger is installed in a hard accessible placewith Ethernet connection it can simultaneously with the data recording on the memory card makedata transmitting to PC. It enables to make a remote monitoring of the object. The more detailedanalysis can be made on the basis of the data stored on the memory card. Web-interface enablesvia PC browser to make aomputer.

Specyfikacja techniczna

  • Nominal operating supply voltage ( ), V: 220 / 240
  • Performance capacity voltage ( / ), V: 24 – 265
  • Power-line frequency, Hz: 45 – 65
  • Power consumption (from line ~220 V), VA, not more: 6.0
  • Power consumption (from power source +24 V), VA, not more: 2.2
  • Period of data recording to the memory card, sec.: 0,001 – 3600
  • External memory storage (memory card, optional): SD / MMC
  • Maximal capacity of external memory card, GB: 32
  • Supported file systems of external memory card, FAT: 12, 16, 32
  • Minimal size of data file, KB 32Maximal size of data file, MB: 512
  • Size of one block of recorded data (15 channels), byte: 68
  • Error of clock run, at temperature 25 ºС, not more, sec / day: 1
  • Connection to Ethernet or PC: 10Base-T / 100Base-TModbus
  • TCP: yes
  • Web-interface: yes
  • FTP: yes
  • Weight, kg, not more: 0.5
  • Overall dimensions, mm: 157 х 91 х 57
  • The intent of the device: Digital indication devices
  • Nominal working mode: continuous
  • Protection class rating (case / terminal block): ІР40 / IP20
  • Protection class from electric shock: II


General technical parameters
Data storage 1x SD, 1x MMC
Ethernet 1x 10/100BaseT(X)
Protocol support Modbus TCP
Industrial grade
IP rating IP20, IP40
Input voltage 220~240VAC

Write a review

Note: HTML is not translated!
Bad Good
We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.