This category contains converters from RS-485 to RS-232 interface. If you have any questions or need additional informations about the proucts please contact our category assigned sales specialists.
Shipping 24h
Test for Free!
Brand: 3onedata
Model: TLC485
Industrial bidirectional RS-232 to RS-485 converter, without opto-isolation, powered from port.The TLC485 is a bi-directional port-powered RS-232 to RS-485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Th..
76,36 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: SW485C
The SW485C is an industrial grade bi-directional port-powered RS232 to RS485 or RS422 converter in a 9 pin format. It can convert any standard full duplex RS232 port to any two-wire balanced half duplex RS485 port or four-wire balanced full duplex RS485 or RS422 port. In simple terms, it will convert any RS232 signal to a RS485 or RS422 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turn..
121,78 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: MODEL485P
RS232 to RS485/422 converter, 2500V isolation, 9VDC. The Model485P is a high performance, multifunctional RS-232/485/422 interface converter. The product configure out connect power, optic-electrical isolation more than 2.5KV. Have small volume, far transmission distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is an interface convert product that have good between performance to price. Adopt it..
136,92 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: SW485WA
The SW485WA is an industrial grade bi-directional port-powered 2500V optoisolated RS232 to RS485 converter in a 9 pin format. The SW485WA is an industrial grade bi-directional port-powered 2500V opto-isolated RS232 to RS485 converter in a 9 pin format. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is ..
205,04 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: SW485GI
Isolated (3000V) RS-485/422 repeater or RS-232 to RS485/422 converter. It can use one function at the same time. The product must have 12-36VDC power input, optic-electrical isolation more than 3KV. Have small volume, 3000m transfer distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is a best performance and price interface converter and Repeater.Features:Support DIN-rail, Terminal block connecti..
258,02 zł
5-10 days
Brand: 3onedata
Model: SW4485I
4-port RS485 HUB with 2000V optoisolation for RS-485 system in complicated electromagnetic environment. It supports a transmission rate up to 115.2KBPS, and adopts two-way transparent transmission, which allows one RS-485 bus or one RS-232 bus to be divided into 4 RS-485 buses, or any divided RS-485 signal to be transparently transmitted to host computer RS-485 or RS-232 hub. Each RS-485 port of slave computer is provided with reverse connection ..
461,66 zł
2-3 weeks
Brand: ICPDAS
Model: tM-7520U CR
Industrial Isolated RS-232 to RS-485 Converter. The tM-7510U repeater simply amplifies, or boosts, existing RS-485 signals to enable them to cover longer distances. It extends the communication distance by 4000 ft. (1200 m) or increases the maximum number of bus nodes. The module provides 2500 VDC of isolation allowing you to separate and protect critical segments of the system from the rest of the RS- 485 network.The tM-7510U provides 2 modes of..
539,95 zł
2-3 weeks
Brand: ICPDAS
Model: I-7520 CR
Industrial Isolated RS-232 to RS-485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change an..
549,59 zł
2-3 weeks
Brand: ICPDAS
Model: I-7520R CR
Industrial RS-232 to Isolated RS-485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change an..
568,88 zł
2-3 weeks
Brand: ICPDAS
Model: I-7520U CR
Isolated RS-232 to 4 Channels RS-485 Converter. RS-485 Active HubThe I-7520U is isolated RS-232 to 4-ch RS-485 active star wiring hub, it has 4 independent RS-485 output channels and one RS-232 input channel. Each output channel is equipped with an individual driver. The data from a master to the input channel will simultaneously be forwarded to all the four output channels.Baud Rate SettingThe I-7520U provides 2 modes of baud rate setting, one i..
592,98 zł
2-3 weeks
Brand: ICPDAS
Model: I-7520A CR
Industrial Isolated RS-232 to RS-422/485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to chang..
621,91 zł
2-3 weeks
Brand: ICPDAS
Model: I-7520AR CR
RS-232 to isolated RS-422/485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change any hardw..
655,66 zł
