2-3 weeks
Industrial CAN to multi-mode fiber converter, ST connector.
Fiber optic transmission medium is a good material to protect data transmission from EMI/RFI interference and has been used in harsh environment extensively. On the other hand, CAN bus is famous in industrial application. In order to solve the problem between different transmission medium, I-2532 is specially designed for converting the electrical CAN bus signal to fiber optic cables.
The fiber length between two I-2532s can be up to 1.4km (4593ft), it is mainly decided by the cable attenuation of fiber and the CAN bus baud. I-2532 is the economic solution for applications which require protecting the data transmission from electrical exposure, surges, lightning or chemical corrosion.
Features:
- Compatible with CAN specification 2.0A and 2.0B
- Fully compatible with ISO 11898-2 standard
- Support baud rate up to 500Kbps
- Jumper for 120Ω terminator resistor of the CAN bus
- Fiber Port: ST (Multi-mode)
- Wave Length: 850 nm
- Auto-baud detection
- Up to 100 nodes on CAN port
- Removable terminal block
- DIN-rail Mount
Manufacturer's warranty: 12 months
General technical parameters | |
CAN ports | 1x CAN |
Fiber mode | Multi-mode |
Fiber | 1x 10/100Base-FX |
Protocol support | CAN |
Industrial grade | |
Operating temperature | -25°C to 75°C |
Input voltage | 10~30VDC |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!