3-4 days
Industrial PROFINET master to Ethernet IP converter, housing type A (slim), DIN rail mount.
HD67B78 allows you to connect a PROFINET net with an EtherNet/IP net Master (for example an Allen-Bradley PLC...) in order to exchange the informations between the networks. Converter is easy to install and configure thanks to free SW67B78 software available with device.
Configuration:
Thanks to the SW67B78 software on your PC you can:
- Define the parameters of PROFINET line
- Define the parameters of EthernetIP line
Characteristics:
- Up to 500 bytes in reading and 500 bytes in writing on EthernetIP side
- Bi-directional information exchange between EthernetIP and PROFINET
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 2x Ethernet
- Data Rates Ethernet/IP: 10/100 Base-T Autosensing
- Data Rates PROFINET: 10/100 Base-T Autosensing
- Ethernet/IP connector: RJ45
- PROFINET connector: RJ45
- Power supply: 8...24VAC; 12...35VDC
- Power supply connector: 2way 5mm terminal block
- Operating temperature: -40° to +85° (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail moUnt
- Software: SW67B78
- ORDER CODE: HD67B78-A1
Configurator – Software SW67B78 FREE DOWNLOAD
General technical parameters | |
Ethernet | 2x 10/100BaseT(X) |
Protocol support | PROFINET, Ethernet IP |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!