3-4 days
Industrial PROFINET to NMEA 2000 converter, housing type A (slim), DIN rail mount.
HD67600 allows you to connect some NMEA2000 devices (for example fluid level sensors, management of heat and cold, lights, etc) with a PROFINET net (for example a SIEMENS PLC, etc) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67600 software.
Configuration:
Thanks to the SW67600 software on your PC you can:
- Define the parameters of PROFINET line
- Define the parameters of NMEA 2000 line
- Define the NMEA 2000 frames that the Converter can accept
- Define the NMEA 2000 frames that the Converter sends trough the NMEA 2000 line
- Update the device
Characteristics:
- Mountable on 35 mm DIN rail
- Up to 512 bytes in reading and 512 bytes in writing
- Bi-directional information exchange between CAN bus and PROFINET bus
- Triple isolation between CAN - Power Supply, CAN - Ethernet, Power Supply - Ethernet
Specifications:
- Ports: 1x CAN; 2x Ethernet
- Data Rates NMEA 2000: Up to 1Mbps
- Data Rates PROFINET: 100 Base-T Autosensing
- NMEA 2000 connector: 3 way 5mm terminal block
- PROFINET connector: RJ45
- Power supply: 8~24VAC; 12~35VDC
- Power supply connector: 2 way 5 mm terminal block
- Operating temperature: -40° to +85° (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67600
- ORDER CODE: HD67600-A1
