2-3 weeks
Brand: ICPDAS
Model: PCI-P16C16U CR
Industrial Universal PCI card with 16 isolated Digital Inputs and 16 Open-collector Digital Outputs (Sink, NPN). The PCI-P16C16U universal PCI card supports 3.3 V/5 V PCI bus. These cards contain 16 optically isolated Digital Input channels and 16 open collector (Sink, NPN) Digital Output channels. The DI channels provide 5000 Vrms isolation protection that allows the input signals to be completely floated so as to prevent ground loops and isolat..
1 306,49 zł
2-3 weeks
Brand: ICPDAS
Model: I-8430 CR
Programmable Automation Controller with 4 I/O Expansion Slots. The I-8430 and I-8830 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.The CPU is..
1 311,31 zł
2-3 weeks
Brand: ICPDAS
Model: I-2542-A CR
Industrial RS-232/422/485 to Fiber Converter, Single-Mode 15 Km, SC connector, TX 1310 nm, RX 1550 nm. The I-2542 series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, fiber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new fi..
1 316,13 zł
2-3 weeks
Brand: ICPDAS
Model: I-2542-B CR
Industrial RS-232/422/485 to Fiber Converter, Single-Mode 15 Km, SC connector, TX 1550 nm, RX 1310 nm. The I-2542 series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, fiber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new fi..
1 316,13 zł
2-3 weeks
Brand: ICPDAS
Model: PET-7017 CR
Ethernet PoE I/O Module with 1 Ethernet PoE Port, 8 Analog Inputs and 4 Digital Outputs. The ET-7017/PET-7017/ET-7217/PET-7217 is a module with 8-channel differential analog inputs and 4-channel digital ouputs. It provides programmable input range on all analog channels (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA and 4 ~ 20 mA) and digital output can be set alarm output with Short-circuit protection and overload protection..
1 316,13 zł
2-3 weeks
Brand: ICPDAS
Model: PEX-P8R8i CR
PCI Express card with 8 Isolated Digital Inputs and 8 Relay Outputs. The PEX-P8R8i/PEX-P16R16i is a PCI Express card with programmable digital I/O interface. It provides 8/16 photocoupler digital inputs with 2000 VDC isolation protection, allows the input signals to be completely fl oated to prevent the ground loops. It is also equipped with 8/16 relay outputs for controlling ON/OFF of external devices, driving external relays or small power swit..
1 316,13 zł
2-3 weeks
Brand: ICPDAS
Model: I-7017R-A5 CR
8-channel Analog Input Module using the DCON Protocol. The I-7017R is an 8-channel analog input module with an extremely high quality protection mechanism where the overvoltage protection is 240 Vrms. The input type includes both voltage and current. The I-7017R is an upgraded version of the I-7017, with the only difference being that the I-7017R is much more suitable for critically harsh environments. The sampling rate of the I-7017R is adjustab..
1 325,78 zł
2-3 weeks
Brand: ICPDAS
Model: I-87026PW CR
6-channel Analog Input, 2-channel Analog Output, 2-channel Digital Input and 2-channel Digital Output Module. The 87026PW is a multifunction module that includes 6 analog input channels, 2 analog output channels, 2 digital input channels, 2 digital output channels. It provides a programmable input range on all analog input (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA or 4 ~ 20 mA), analog outputs are 12 bit at +/-5 V, +/-10..
1 325,78 zł
2-3 weeks
Brand: ICPDAS
Model: NS-208G CR
Unmanaged 8-port 10/100/1000 Base-T Ethernet Switch with plastic casing. The NS-208G/NSM-208G has 8 Ethernet Switching ports that support 10/100/1000 Base-T, with a 10/100/1000M auto negotiation feature and auto MDI/MDI-X function. It can connect 8 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps or 1000 Mbps) for corresponding connections.The flow control mechanism is also negotiated. There is link/data rate LE..
1 325,78 zł
2-3 weeks
Brand: ICPDAS
Model: PEX-D144LS CR
PCI Express Card with 144 Digital Inputs and Outputs. The D144LS provides a high-density connector that reduces the amount of installation space required for the card in the computer.The D144LS supports the 144 CMOS digital I/O lines that consist of eighteen 8-bit bi-direction ports: port A (PA), port B (PB) and port C (PC) in a connector. All ports are configured as input ports during power-on or after a reset.The D144LS also includes an onboard..
1 325,78 zł
2-3 weeks
Brand: ICPDAS
Model: WISE-7126 CR
Ethernet PoE I/O Module with 6-channel Analog Inputs, 2-channel Analog Outputs, 2-channel Digital Inputs And 2-channel Digital Outputs. WISE-7126 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving..
1 330,60 zł
2-3 weeks
Brand: ICPDAS
Model: I-7015 CR
6-channel RTD Input Module using the DCON Protocol. The I-7015 is a series of 6-channel RTD input modules that are used for measuring temperatures using RTD sensors and each channel can be connected to a different type of sensor. The I-7015P/M-7015P is specifically designed for long-distance RTD measurement, and features automatic compensation for three-wire RTD, meaning that accurate measurements can be obtained regardless of the length of the w..
1 335,42 zł