2-3 weeks
Brand: ICPDAS
Model: I-7016D CR
2-channel Strain Gauge Input Module using the DCON Protocol with LED Display. The I-7016 not only can process the module data from a load cell or a strain gauge, it also features linear mapping that can be used to directly convert the resulting data into weight via a user-defined correspondent table. The I-7016 supports full-bridge strain gauges and provides 2 Analog Input channels, 1 excitation voltage output channel, 2 Digital Input channels an..
1 513,79 zł
2-3 weeks
Brand: ICPDAS
Model: I-8KE4 CR
Ethernet Expansion Unit with 4 Expansion Slots and 1x RS-232 Port. The I-8KE4 and I-8KE8 are embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.Featur..
1 513,79 zł
2-3 weeks
Brand: ICPDAS
Model: M-7026 CR
6-channel Analog Input, 2-channel Analog Output, 3-channel Digital Input and 3-channel Digital Output Industrial Module Using the DCON and Modbus Protocols. The M-7026 is a multifunction module that includes 6 analog input channels, 2 analog output channels, 3 digital input channels, 3 digital output channels. It provides a programmable input range on all analog input (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA or 0 ~ +20 mA), analog..
1 513,79 zł
2-3 weeks
Brand: ICPDAS
Model: M-7033D CR
3-channel RTD Input Industrial Module using the DCON and Modbus Protocols with LED Display. The I-7033 is a 3-channel RTD Input module that is used for measuring temperatures via an RTD sensor and supports Pt100, Ni120, and Pt1000 type sensors. The module allows 2/3/4-wire RTD connections and features open wire detection. In addition, the I-7033 also includes 3000 VDC intra-module isolation, and supports lead resistance elimination for 3/4-wire c..
1 528,26 zł
2-3 weeks
Brand: ICPDAS
Model: PET-7016 CR
Ethernet I/O Industrial Module with 1 Ethernet PoE port, 2 Strain Gauge Inputs, 2 Digital Inputs and 2 Digital Outputs. The ET-7016/PET-7016 is a strain gauge module with 2 analog input channels, 1 excitation voltage output channel, 2 digital input channels and 2 digital output channels module. It provides various programmable analog input inputs (+/-1 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, and +/-2.5 V) and supports full-bridge, half-bridge..
1 528,26 zł
2-3 weeks
Brand: ICPDAS
Model: I-7590 CR
Industrial RS-232/RS-422/RS-485 to M-Bus Converter. The I-7590 is specially designed for M-Bus slave device. It is a serial bus to M-Bus convertor. First, for serial bus, it offers RS-232, RS-422 and RS-485 three kinds of communication way. Second, the I-7590 has two rotary switches, one for serial port baud and the other for M-Bus port baud. Third, the I-7590 uses transparent transmission between serial bus and M-Bus communication. Through these..
1 533,08 zł
2-3 weeks
Brand: ICPDAS
Model: I-8123W CR
One port intelligent CANopen master interface module. The CAN (Controller Area Network) is a serial communication protocol, and efficiently supports distributed real-time control with a very high level of security. It is an especially suit for networking "intelligent" devices as well as sensors and actuators within a system or sub-system. In CAN network, there is no addressing of subscribers or stations in the conventional sense, but instead prio..
1 542,72 zł
2-3 weeks
Brand: ICPDAS
Model: PET-7024 CR
Ethernet PoE I/O Industrial Module with 1 Ethernet PoE Port, 4 Analog Outputs, 5 Digital Inputs and 5 Digital Outputs. The ET-7024/PET-7024/ET-7224/PET-7224 is a multifunction module includes 4 channels analog output, 5 channels digital input and 5 channels digital output. It provides a variety of programmable analog output options (+/-5 V, +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA), and each analog output can be programmed to accept either current or vol..
1 542,72 zł
2-3 weeks
Brand: ICPDAS
Model: I-2533CS-A CR
Industrial CAN to Fiber Converter, 1 single mode, SC connector. The I-2533CS series is a local CAN bridge used to establish a connection between two CAN bus system via single mode fiber optic transmission medium. In order to solve the problem between CAN and fiber transmission medium, the I-2533CS series is specially designed for converting the electrical CAN bus signal to fiber optic cables. Besides, the I-2533CS-A/B supports Wavelength Division..
1 547,54 zł
2-3 weeks
Brand: ICPDAS
Model: I-2533CS-B CR
Industrial CAN to Fiber Converter, single mode, 15km, SC connector. The I-2533CS series is a local CAN bridge used to establish a connection between two CAN bus system via single mode fiber optic transmission medium. In order to solve the problem between CAN and fiber transmission medium, the I-2533CS series is specially designed for converting the electrical CAN bus signal to fiber optic cables. Besides, the I-2533CS-A/B supports Wavelength Divi..
1 547,54 zł
2-3 weeks
Brand: ICPDAS
Model: I-7523D CR
Programmable Intelligent Communication Controller with LED Display. 1x 5-wire RS-232 or 2-wire RS-485, 2x RS-232 ports and 1 RS-485 port. Onboard 1 KB Queue bufferThe I-752N series module is equipped with a 1 KB queue buffer for its local RS-232 device. All input data can be stored in the queue buffer until the Host PC has time to read it. This feature allows the Host PC to link thousands of RS-232 devices without any loss of data.3000V isolation..
1 547,54 zł
2-3 weeks
Brand: ICPDAS
Model: NSM-205PF
Industrial Ethernet PoE Switch with 4x Ethernet Ports, 1x Fiber Port and metal casing. The NS-205PF/NSM-205PF is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PF/NSM-205PF makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and suppor..
1 547,54 zł