2-3 weeks
Brand: ICPDAS
Model: NSM-200G-SFP CR
Industrial Ethernet to Fiber Converter, with SFP slot. ICP DAS's line of feature rich 10/100/1000 SFP Media Converters transparently connects copper to SFP for multimode or single mode fiber. Our 10/100/1000 Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices. The pluggable fiber optics port allows for flexible network con..
1 431,84 zł
2-3 weeks
Brand: ICPDAS
Model: I-87016W CR
2-channel Isolated Strain Gauge Input Module. I-87016W not only processes the data from load cells or strain gauges, but also features linear mapping that generates intuitive and synchronic results for you; by user-defined corespondent table, I-87016W converts the data into weight directly.Features:Strain Gauge MeasurementHigh Resolution: 16-bitExcitation Voltage Output: 0 ~ 10 VIndividual Channel Configuration2-channel Digital Inputs and 2-chann..
1 436,66 zł
2-3 weeks
Brand: ICPDAS
Model: TPD-703 CR
7" Touch HMI device with 16MB SDRAM/16MB Flash Memory, RS-232 and RS-485 port, RTC and Ethernet PoE port. TPD 7 inch series is a series of touch HMI designed for building and home automation with high resolution TFT color touch screen. The TPD-703 expands its memory to 16 MB SDRAM and 16 MB Flash, while the TPD-703-64 expands its memory to 64 MB SDRAM and 64 MB Flash. Besides, TPD-703/703-64 provides 1 RS-232 port, 1 RS-485 port, Power over Ether..
1 436,66 zł
2-3 weeks
Brand: ICPDAS
Model: NSM-205AF
Industrial Ethernet Switch with 4x Ethernet Ports, 1x Fiber Port and metal case. The NS-205AF/NSM-205AF is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions.The NS-205AF/NSM-205AF provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation..
1 441,48 zł
2-3 weeks
Brand: ICPDAS
Model: CAN-8223 CR
CANopen Remote I/O Unit with 2 Expansion Slots. The CAN-8x23 main control unit is specially designed for the slave device of CANopen protocol. It follows the CANopen Spec DS-301 V4.02 and DSP-401 V2.1, and supplies many features for users, such as dynamic PDO, EMCY object, error output value, SYNC cyclic and acyclic, etc.The CAN-8x23 supports up to 1/2/4/8 slots for I/O expansion and suits with a lot of ICP DAS DI/AI/DO/AO modules. User can choos..
1 446,30 zł
2-3 weeks
Brand: ICPDAS
Model: CAN-8224
DeviceNet Remote I/O Unit with 2 I/O Expansion Slots. The CAN-8124/CAN-8224 main control unit is specially designed for the slave device of DeviceNet protocol. It follows the Specification of DeviceNet. In order to expand I/O channel more flexible, an CAN-8x24 supports 1/2/4 slot(s) for I/O expansion and suits with a lot of ICP DAS DI/AI/DO/AO modules.Users can choose DI/DO/AI/AO modules of I-87K series or I-8000 series to fit the customized prac..
1 446,30 zł
2-3 weeks
Brand: ICPDAS
Model: ET-7024 CR
Ethernet I/O Module with 1 Ethernet Port, 4 Analog Outputs, 5 Digital Inputs and 5 Digital Outputs. The ET-7024/PET-7024/ET-7224/PET-7224 is a multifunction module includes 4 channels analog output, 5 channels digital input and 5 channels digital output. It provides a variety of programmable analog output options (+/-5 V, +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA), and each analog output can be programmed to accept either current or voltage as output depe..
1 446,30 zł
2-3 weeks
Brand: ICPDAS
Model: I-7016P CR
1-channel Strain Gauge Input Module using the DCON Protocol. The “P” version of the I-7016 module is another milestone in the development of the I-7016 series, and is a testament to excellence by the R&D team at ICP DAS. The I-7016P is specifically designed for long-distance strain gauge measurement, and provides 1 Digital Input channel as a 50 Hz event counter and 4 Digital Output channels that can act as high or low alarms. The I-7016P also..
1 446,30 zł
2-3 weeks
Brand: ICPDAS
Model: M-7003 CR
8-channel Analog Input and 4-channel Relay Output Module using the DCON and Modbus Protocol. The M-7003 is a 16-bit, 8-channel analog inputs and 4-channel for relay output. All of its channels are Form A type relay module that provides programmable input range on all analog channels (±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA, 0 ~ 20 mA and 4 ~ 20 mA). Each analog channel is allowed to configure an individual range and has 120 VDC high overvolta..
1 446,30 zł
2-3 weeks
Brand: ICPDAS
Model: I-7524 CR
Programmable intelligent communication controller. 1x port 5-wire RS-232 or 2-wire RS-485, 3 RS-232 ports and 1 RS-485 port. Onboard 1 KB Queue bufferThe I-752N series module is equipped with a 1 KB queue buffer for its local RS-232 device. All input data can be stored in the queue buffer until the Host PC has time to read it. This feature allows the Host PC to link thousands of RS-232 devices without any loss of data.3000V isolation on RS-485 si..
1 451,12 zł
2-3 weeks
Brand: ICPDAS
Model: I-7565-CPM CR
Industrial USB to CANopen Master Converter. The I-7565-CPM was developed as a standardized CANopen network with highly flexible configuration capabilities. It is a CANopen master solution of USB interface, and has an 80 MHz 186 CPU inside. There is a CANopen protocol interpreter, I-7565-CPM firmware, running in the I-7565-CPM. User can use this converter to process the complex CANopen protocol without increasing the PC loading very much. The rich..
1 451,12 zł
2-3 weeks
Brand: ICPDAS
Model: PEX-P32C32 CR
PCI Express card with 32-channel Optically-isolated Digital Input and 32-channel optoisolated Open-collector Digital Output (Sink/Source). The PEX-P32C32/P32A32 series provides 32 optically-isolated Digital Input channels and 32 optically-isolated Digital Output channels, arranged into four isolated banks. Each input channel uses a photocoupler input that allows either an internal isolated power supply or an external power supply to be connected,..
1 451,12 zł