HD67564-A1 Industrial PROFIBUS Slave to Modbus TCP Master Converter DPV0

Industrial PROFIBUS slave to Modbus TCP master converter, PROFIBUS DP DPV0 support, housing type A (slim), DIN rail mount. 

The HD67564-A1 converter enables seamless integration between a PROFIBUS Master device (such as Siemens PLC) and a Modbus TCP Slave network. Its slim housing type A (only 23 mm wide) allows efficient installation even in compact control cabinets. It is ideal for industrial automation systems where existing PROFIBUS controllers must communicate with modern Modbus TCP-based devices such as HMIs, SCADA systems, power meters, or I/O modules. Thanks to robust industrial-grade components, it offers stable operation in demanding environments, with a wide operating temperature range from -40°C to +85°C.

HD67564-A1 allows to connect PROFIBUS master like Siemens PLC to Modbus TCP slave. Converter is easy to use and configure thanks to free SW67564 software.

This converter is suitable for applications in process automation, energy monitoring, transport systems, water treatment plants, and manufacturing lines. It supports bi-directional data exchange between the networks, allowing Modbus TCP devices to send and receive process values, alarms, and control commands from PROFIBUS systems without the need for complex hardware replacements.

Configuration:

Thanks to the SW67564 software on your PC you can:

• Define the parameters of Modbus TCP line
• Define the parameters of PROFIBUS
• Define which Modbus TCP registers are read/written from/to the PROFIBUS slaves
• Define in and from which PROFIBUS bytes map/take the data
• Create a GSD File
• Update the device

The free SW67564 configuration tool offers an intuitive interface for setting communication speeds, parity, and mapping I/O between the networks. Advanced diagnostic functions allow real-time monitoring of PROFIBUS and Modbus TCP traffic, status LEDs indicate link activity, and the built-in GSD file generator simplifies integration with PLC programming environments.

Characteristics:

• Electrical isolation between two buses
• Bi-directional information exchange between Modbus TCP network and PROFIBUS
• Up to 244 bytes in reading and 244 bytes in writing
• Mountable on 35 mm DIN rail

The device’s electrical isolation ensures signal integrity and protection against voltage surges. With support for up to 244 bytes in each direction, it can handle complex industrial data structures. Its rugged enclosure and DIN rail mounting make it suitable for both fixed installations and mobile machinery.

Specifications:

• Ports: 2x Ethernet; 1x PROFIBUS
• Data Rates PROFIBUS: Up to 12 Mbps
• Data Rates Ethernet: 10/100 Mbps Autosensing
• PROFIBUS connector: D-Sub9 Female
• Ethernet connector: RJ45
• Power supply: 8...24VAC; 12...35VDC
• Operating temperature: -40°C/+85°C (-40°F/+185°F)
• Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
• Weight: 200g approx
• Mechanical fixing: DIN Rail mount
• PROFIBUS DP DPV0 support
• Software: SW67564
• ORDER CODE: HD67564-A1

Thanks to its industrial-grade design and straightforward configuration, the HD67564-A1 is a reliable solution for engineers and system integrators needing fast and stable communication between PROFIBUS Masters and Modbus TCP devices.

Configurator – Software SW67564 FREE DOWNLOAD

---