Converters of industry standards and protocols
This category includes industrial converters which allows to integrate devices with different protocols and communication interfaces. Industrial converters are most often used to extend existing networks and industrial structures with additional, unplanned or previously planned devices that do not always have to be compatible with the original protocol or communication standard.
Which protocols are supported by converters from our offer?
We have prepared for you all kinds of industrial converters, depending on the protocol of the communication device with which you want to integrate your system. Our offer includes BACnet IP and BACnet MSTP, CAN, DALI, DeviceNet, DMX, Ethernet, HART, J1939, KNX, Lonworks, M-Bus, Modbus RTU, Modbus TCP, NMEA 2000, PROFIBUS, PROFINET, RS-232, RS-485, LoRaWAN, USB, Fiber, TTL and SNMP converters.
For your convenience, we have divided our converters according to the technology they support. Choose the one that interests you and get to know with the available devices:
-120x120w.png){kind=logo}
-120x120w.png){kind=logo}
-120x120w.png){kind=logo}
Shipping 24h
Test for Free!
Brand: 3onedata
Model: TLC485
Industrial bidirectional RS-232 to RS-485 converter, without opto-isolation, powered from port.The TLC485 is a bi-directional port-powered RS-232 to RS-485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Th..
76,36 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: Model232I
Industrial RS232 separator with photoelectric isolation up to 5000V.Model232I is a kind of RS232 system communication serial port optic isolation product. This product support transmission rate as high as 912600bps, no external power needed, optic electric isolation 5KV, is applicable in tough environment. According to different customer need, separately corresponds to three line serial port application with RTS/CTS (or DTR/CTS). Transmission dis..
99,07 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: FL485
Industrial RS-485 separator with 4500V isolation and Alnico housing. Optoisolator (4500V), RS-485 interface separator (repeater) with Alnico housing compatible with IEC61000-4-5 and ITU-TK20&K21 standards for top quality surge protectors. FL485 have high respond speed, low output rudimental voltage, ascendance transfer performance. All have #10 ground screws which must be connected to a solid ground.Features:Three stages of protection on ever..
101,24 zł
5-10 days
Brand: 3onedata
Model: NPM301
Economic, embedded serial device server module. NPM301 is high-performance industrial embedded module that allows users to convert serial port to Ethernet port, which can satisfy various common requirements of users for power consumption, temperature, size and processing ability under complex environment. The compact size makes it possible to be embedded in all industrial control equipment, and provide non-blocking serial communication. The rich ..
110,88 zł
5-10 days
Brand: 3onedata
Model: NPM301Z
Ethernet 1-Port Serial Device Server Module to 1 100M Ethernet. NPM301Z is a high performance embedded serial port to Ethernet module, it supports 1 RS-232, RS-422 or RS-485 to 1 100M Ethernet port. The module is embedded with network transformer, and it can form a 10Base-T/100Base-TX self-adaptive Ethernet port via adding a RJ45 port. Baud rate ofserial port is 300-115200bps. It supports TCP Server, TCP Client, TCP Auto, UDP and Real COM operati..
110,88 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: Model1100-M
Ethernet 10/100M, 1310nm, Multi-mode, 2 km, 10/100M Fast Ethernet Media Converter. Model1100, 10/100M Media Converter, provides a cost effective plug-and-play solution for long-range 10Base-T or 100Base-TX Ethernet extensions and added benefit of 10/100 auto-negotiation, making it the perfect choice when planning future upgrades of 10Base-T networks. Model1100 Ethernet Fiber converters are ultra-miniature in size and feature a shielded RJ45 Ether..
121,10 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: SW485C
The SW485C is an industrial grade bi-directional port-powered RS232 to RS485 or RS422 converter in a 9 pin format. It can convert any standard full duplex RS232 port to any two-wire balanced half duplex RS485 port or four-wire balanced full duplex RS485 or RS422 port. In simple terms, it will convert any RS232 signal to a RS485 or RS422 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turn..
121,78 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: USB485
USB to RS-485/422 industrial converter. USB485 is a kind of USB to RS-485/422 industrial intelligent converter. It is the best solution for the communication between USB and RS-485/422. Compared with RS-232 to RS-485/422 converter, USB to RS-485/422 converter has many advantages. Alternative offer for UPort 1130.Features:Small volume, easy installationNo power supply needed, plug and playSingle chip(ASIC) USB port to serial port communicationTran..
121,78 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: Model1100-S
Ethernet 10/100M, 1310nm, Single-mode, up to 20 km transmission, 10/100M Fast Ethernet Media Converter. Model1100, 10/100M Media Converter, provides a cost effective plug-and-play solution for long-range 10Base-T or 100Base-TX Ethernet extensions and added benefit of 10/100 auto-negotiation, making it the perfect choice when planning future upgrades of 10Base-T networks. Model1100 Ethernet Fiber converters are ultra-miniature in size and feature ..
125,35 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: USB232
USB to RS-232 industrial converter. USB232 smart adapter cable lets PC users add an additional serial port for RS-232 connections using USB. It provides an external plug-and-play port for convenient connection of cell phones, digital cameras, modems and ISDN terminals. Just plug the device into the serial cable and the cable into the USB port. Automatic handshake is supported. No IRQs are required. This smart cable Transmits up to 230 kbps with a..
125,92 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: MODEL485P
RS232 to RS485/422 converter, 2500V isolation, 9VDC. The Model485P is a high performance, multifunctional RS-232/485/422 interface converter. The product configure out connect power, optic-electrical isolation more than 2.5KV. Have small volume, far transmission distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is an interface convert product that have good between performance to price. Adopt it..
136,92 zł
Shipping 24h
Test for Free!
Brand: 3onedata
Model: Model1200-M
Industrial Ethernet Media Converter with 2 10/100BaseT(X) Ethernet ports to multi-mode optic fiber. Model1200, 10/100M Media Converter, provides a cost effective plug-and-play solution for long-range 10Base-T or 100Base-TX Ethernet extensions and added benefit of 10/100 auto-negotiation, making it the perfect choice when planning future upgrades of 10Base-T networks. Model1200 Ethernet Fiber converters are ultra-miniature in size and feature a sh..
151,33 zł
