Industrial Ethernet converters
This category includes converters communicating in the Ethernet standard (industrial Ethernet). Ethernet and Ethernet IP are communication protocols used in industrial automation, among others, for data exchange between servers, robots, HMI panels, readers or PLC controllers.
What additional protocols are supported by our converters?
We have prepared for you industrial Ethernet converters of various types, depending on the communication protocol of the devices with which you want to integrate your system. Our offer includes Ethernet converters for: BACnet IP or MSTP, CAN, DALI, DeviceNet, DMX, J1939, KNX, Modbus RTU, Modbus TCP, NMEA 2000, PROFIBUS, PROFINET, RS-232, RS-485, Fiber Optic and SNMP .
For your convenience, we have divided our Ethernet converters according to the technology they support. Choose the one that interests you and get to know with the available devices:
-120x120w.png){kind=logo}
2-3 weeks
Brand: ICPDAS
Model: NS-200WDM-A CR
Industrial Ethernet to Fiber Single-Strand Media Converter, TX 1310 nm, RX 1550 nm, SC connector. The NS-200WDM Series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, fiber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new fiber..
1 277,57 zł
2-3 weeks
Brand: ICPDAS
Model: NS-200WDM-B CR
Industrial Ethernet to Fiber Single-Strand Media Converter, TX 1550 nm, RX 1310 nm, SC connector. The NS-200WDM Series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, fiber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new fiber..
1 277,57 zł
-1-250x250h.png "IES615-1F-2D(RS-232)")
5-10 days
Brand: 3onedata
Model: IES615-1F-2D(RS-232)
Industrial Ethernet Switch with 4 10/100Mbps ports, 1 Fiber port and 2 RS-232 ports. IES615-1F-2D (RS-232) is an industrial Ethernet switch with 4 10/100Mbps ports, 1 Fiber port and 2 RS-232 ports. It has integrated serial server functionality and redundant SW-Ring technology (recovery time <20ms). Users can easily set up redundancy to increase network reliability. In addition, the IES615-1F-2D supports the AT command board and 1 relay alarm o..
1 292,03 zł
3-4 days
Brand: ADF Web
Model: HD67030-B2-20
Industrial MBus to Ethernet converter, master MBus up to 20 slaves, housing type B (wide), DIN rail mount. The converter allows communication between a PC/PLC and the MBus Slaves, locally or remotely, through Ethernet connection. The HD67030-B2-20 converter can read up to 20 MBus receivers of any type (eg water meters, gas meters, energy meters). Converter is easy to configure thanks to free SW67030 software.Configuration:Thanks to the SW67030 so..
1 320,95 zł
3-4 days
Brand: ADF Web
Model: HD67839-B2
Industrial DALI to Ethernet converter, housing type B (wide), DIN rail mount. HD67839-B2 allows you to connect a DALI net (a light system exc...) with an Ethernet network (a simple PC or other) in order to exchange informations between the nets. Converter is easy to configure thanks to free SW67839 software.Configuration:Thanks to the "DALI Console" software on your PC you can:Configure the DALI networkSetup the DALI devices (groups, scenes, IDs,..
1 320,95 zł
Shipping 24h
Test for Free!
Model: NP318T-8DI(RS-485)
Industrial Serial Device Server with 8 RS-485 ports and 2 Ethernet ports.NP318T-8DI (RS-485) is a high performance, industrial grade serial to Ethernet server, it can satisfy some kinds of customer requirements in consumption, temperature, volume and handle ability. It provides 8 port RS-485/422(RS-485/422 connector: 5 bit terminal block) and 2 port 10/100Base-Tx Ethernet, can focus manage disperse serial device, master through network, easy, con..
1 373,99 zł
-11-250x250w.png "NP318T-8D(3IN1)")
5-10 days
Brand: 3onedata
Model: NP318T-8D(3IN1)
Industrial Device Server with 8 Serial ports and 2 Ethernet ports. The NP3XXT 3IN1 series are serial-to-Ethernet device servers that enable the serial device to have networking capabilities immediately. They support 4/8-port RS-232/485/422 serial port and 1/2-port 10/100Base-T(X) Ethernet interface optional. The serial device server can easily and centrally manage distributed serial devices and hosts through the network, support TCP, UDP, ARP, IC..
1 422,20 zł
3-4 days
Brand: ADF Web
Model: HD67030-B2-40
Industrial MBus to Ethernet converter, master MBus up to 40 slaves, housing type B (wide), DIN rail mount. The converter allows communication between a PC/PCL and the MBus Slaves, locally or remotely, through Ethernet connection. The HD67030-B2-40 converter can read up to 40 MBus receivers of any type (eg water meters, gas meters, energy meters). Converter is easy to configure thanks to free SW67030 software.Configuration:Thanks to the SW67030 so..
1 427,02 zł
2-3 weeks
Brand: ICPDAS
Model: NSM-200G-SFP CR
Industrial Ethernet to Fiber Converter, with SFP slot. ICP DAS's line of feature rich 10/100/1000 SFP Media Converters transparently connects copper to SFP for multimode or single mode fiber. Our 10/100/1000 Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices. The pluggable fiber optics port allows for flexible network con..
1 431,84 zł
5-10 days
Brand: Contemporary Controls
Model: EIMK-100TF
Industrial Media Converter with 2 Ethernet ports and 1 Fiber port. The EIMK Skorpion Media Converter series makes the conversion of an Ethernet copper segment to fiber simple. By operating fullduplex at 100 Mbps provides the highest possible performance on 100 Mbps links. Therefore performance is enhanced by not introducing the store-and-forward data latency inherent in a switch. Each of the three models supports full-duplex operation for 100BASE..
1 436,66 zł
-250x250h.png "INP314T-4DI(3IN1)")
5-10 days
Brand: 3onedata
Model: INP314T-4DI(3IN1)
Industrial, 4-port RS-232/485/422 to 2-port Ethernet Converter.High performance, industrial grade INP314T-4DI(3IN1)-DB-2P(12-48VDC) is serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This product supports 4 3IN1 serial ports to 2 100M Ethernet copper ports which supports electromagnetic isolation. It adopts rail or wall moun..
1 451,12 zł
-TB-P(12-48VDC)-250x250.jpg "NP5000-2T-4DI(RS-485)-TB-P(12-48VDC)")
5-10 days
Brand: 3onedata
Model: NP5000-2T-4DI(RS-485)-TB-P(12-48VDC)
Industrial Serial Port Connecting Server with 2 100M Ethernet ports and 4 serial ports RS-485 and SSH security functionNP5000-2T-4DI(RS-485)-TB-P(12-48VDC) is serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This product supports 4 RS-485 serial ports to 2 10/100Base-T(X) self-adaptive Ethernet port. It adopts desktop/wall mou..
1 494,51 zł
