Single-core cables with silicone rubber insulation. Designed for use in places with high ambient temperature, for internal wiring of lighting fixtures, control devices and distributors and heating devices.They do not contain halogens, have a high flash point, very good dielectric properties at eleva..
Single-core cables with silicone rubber insulation. Designed for use in places with high ambient temperature, for internal wiring of lighting fixtures, control devices and distributors and heating devices.They do not contain halogens, have a high flash point, very good dielectric properties at eleva..
Power cables for permanent installation, copper, multi-wire, insulated with heat-resistant PVC and PVC sheathed, high voltage. LgYcyw - Cable with multi-wire (L) flexible core (g), with insulation from heat-resistant PVC (Yc) and PVC sheath (y), high voltage (w).Construction:Live: Copper multi-wire ..
Halogen-free, flame-retardant cables with low smoke emission.The XLPE insulated cables and the sheath of halogen-free thermoplastic material are intended for use as power and signal cables in buildings with high concentration of people, fixed assets and wherever there are increased requirements for ..
Power cables with aluminum wires with XLPE insulation and PE coating. Construction:Veins: Multi-round round class 2 according to EN 60228Screen on the veins: Semi-conductive polyethyleneIsolation: Cross-linked polyethyleneScreen on insulation: Semi-conductive polyethyleneSealing: ThrustMetallic scre..
Power cables with aluminum wires, XLPE insulation and PVC coating.PVC insulated and sheathed cables for the transmission of electricity. Designed for installation in the air, in the ground, under water, inside buildings and in cable ducts.Construction:Cores: Aluminum, round class 1 (RE) or round, ro..
Power cables with aluminum wires, PVC insulation and PE coating.PVC insulated and sheathed cables for the transmission of electricity. Designed for installation in the air, in the ground, under water, inside buildings and in cable ducts.Construction:Cores: Aluminum, round class 1 (RE) or round, roun..
Installation cables with XLPE insulation and halogen-free plastic coating. Installation cables with crosslinked polyethylene insulation and a sheath of halogen-free thermoplastic material, with low fumes and corrosive gases emission during combustion. Designed for installation in buildings with stri..
Special single-core cables in rubber insulation. The cables are intended for permanent installation in rail vehicles, in pipes and closed ducts. 1.8 / 3 kV cables can be used in control devices and distributors up to 1000V. In power and connection systems, this type of cable gives high resistance to..
Wires with insulation and rubber coating for lifting equipment, transport equipment and conveyors.Cables are used where there is frequent winding and unwinding during operation, especially with simultaneous tensile load and / or twisting load and / or forced cable routing. Perfect for use in constru..
Heavy cable with insulation and rubber coating for mining and industry.Cables intended for very heavy mechanical loads, in fixed and mobile installations as a power cord for high power devices, for example in opencast mines, excavations, construction sites and in the engineering industry, in dry and..
Power cables for permanent installation with single or multi-wire copper conductors, with PVC insulation and sheath. Installation cable with PVC insulation and sheath, without a green-yellow conductor (O) or with a green-yellow conductor (J).The equivalents of NYM 300/500 V cables are:YDY 300/500 V ..
Power cables 3 and 4-core wires with insulation and rubber tire for rated voltage 0.6 / 1kV for deep-water engines.It is recommended:to use wire in a well at a depth of immersion up to 20mto not install cables at a temperature lower than -10 ° Cthat the radius of bending expressed in multiples of th..
3 and 4-string power cables with insulation and rubber tire for rated voltage 0.6 / 1 kV for submersible engines.Construction:Working and protective conductors: Copper multi-wire according to PN-EN 60228 class 5 (tinned or uncoated wires)Separator: Polyester film or telephone paperInsulation: Made o..
Single-core cables with silicone rubber insulation. Designed for use in places with high ambient temperature, for internal wiring of lighting fixtures, control devices and distributors and heating devices.They do not contain halogens, have a high flash point, very good dielectric properties at eleva..