Special single-core cables in rubber insulation. The cables are intended for permanent installation in rail vehicles, in pipes and closed ducts. 1.8 / 3 kV cables can be used in control devices and distributors up to 1000V. In power and connection systems, this type of cable gives high resistance to short-circuit and earth-fault overloads.Construction:Cores: Of tinned copper wires, multi-wire flexible classes 5 according to DIN-EN 60228Insulation..
Wires with insulation and rubber coating for lifting equipment, transport equipment and conveyors.Cables are used where there is frequent winding and unwinding during operation, especially with simultaneous tensile load and / or twisting load and / or forced cable routing. Perfect for use in construction, mines, mobile shearers, cranes, conveyors, high mechanical loads, especially at high dynamic tensile loads, e.g. at high acceleration. High res..
Heavy cable with insulation and rubber coating for mining and industry.Cables intended for very heavy mechanical loads, in fixed and mobile installations as a power cord for high power devices, for example in opencast mines, excavations, construction sites and in the engineering industry, in dry and humid rooms and in the open air. It is very mechanically resistant. High resistance to tearing, cutting, abrasion, oils, lubricants, chemicals and th..
Power cables for permanent installation with single or multi-wire copper conductors, with PVC insulation and sheath. Installation cable with PVC insulation and sheath, without a green-yellow conductor (O) or with a green-yellow conductor (J).The equivalents of NYM 300/500 V cables are:YDY 300/500 V cables according to PN-HD 21.4 in the cross sections from 1.5mm² to 10mm²YLY 300/500 V cables according to PN-HD 21.4 in the cross section range from ..
Power cables 3 and 4-core wires with insulation and rubber tire for rated voltage 0.6 / 1kV for deep-water engines.It is recommended:to use wire in a well at a depth of immersion up to 20mto not install cables at a temperature lower than -10 ° Cthat the radius of bending expressed in multiples of the outside diameter of duct D is not less than 5DIt is allowed:to use in conductors with veins made of wires with a nominal diameter of 0.31 mm and la..
3 and 4-string power cables with insulation and rubber tire for rated voltage 0.6 / 1 kV for submersible engines.Construction:Working and protective conductors: Copper multi-wire according to PN-EN 60228 class 5 (tinned or uncoated wires)Separator: Polyester film or telephone paperInsulation: Made of general purpose insulation rubber according to PN-89 / E-29100Insulation color:3-wire: blue, black, brown4-wire: green-yellow, blue, black, brownTir..
Single-core cables with silicone rubber insulation. Designed for use in places with high ambient temperature, for internal wiring of lighting fixtures, control devices and distributors and heating devices.They do not contain halogens, have a high flash point, very good dielectric properties at elevated temperatures, high resistance to many chemicals (oxygen, ozone, vegetable and animal fats, vegetable oils, soap solutions, alcohols, ammonia, weak..