BASRTLX-B

Industrial High Performance BACnet Router with 1 Ethernet port and 1 MS/TP port.

The BASrouterLX is a high-performance BACnet router providing stand-alone routing between BACnet networks such as BACnet/IP, BACnet Ethernet, and BACnet MS/TP. Besides its high-speed processor, it has advanced features such as auto-discovery of MS/TP slaves, MS/TP frame capture and storage for use with Wireshark®. Up to 50 BBMD entries can be made. The BASrouterLX has three physical communication ports - a 10/100 Mbps BACnet/IP Ethernet port, an optically isolated EIA-485 port for MS/TP, and a USB port for future use. Router configuration is accomplished via a web page.

The BASrouterLX is housed in a metal case that mounts on 35-mm DIN-rail and it is powered from a 24 VAC/VDC (± 10%) source. Its half-wave rectified power supply allows sharing of power with other half-wave devices. There are three ports on the unit-one Ethernet, one EIA-485 and a USB port.

The optically-isolated EIA-485 serial port allows for connection to either 2-wire or 3-wire MS/TP networks using a removable 5-pin terminal block. Up to 31 full-load or 62 half-load EIA-485 devices can share the serial bus at data rates between 9.6 and 115.2 kbps. Internal jumpers provide120 O termination and bias. These jumpers can be removed for mid-span installations.

The Ethernet port offers a shielded RJ-45 connector. Through auto-negotiation and Auto-MDIX, it automatically matches connections to the attached equipment.Thus, either CAT5 straight-through or crossover cable can be used to attach to the BACnet/IP network at either 10 or 100 Mbps speed.

Features:

• Versatile routing between:
• BACnet/IP and BACnet MS/TP
• BACnet Ethernet and BACnet MS/TP
• BACnet/IP and BACnet Ethernet
• BACnet/IP and BACnet Ethernet and BACnet MS/TP
• Two BACnet/IP networks
• 10/100 Mbps Ethernet with auto-negotiation and Auto-MDIX
• Optically isolated MS/TP port
• Web server for commissioning and troubleshooting
• Foreign Device Registration (FDR)
• DIN-rail mount (BASRTLX-B) or panel mount (BASRTLX-B/P)
• 24 VAC/VDC input voltage

Specification:

Ethernet Communications

• Compliance: IEEE 802.3
• Protocols supported: BACnet/IP
• Data rate: 10/100 Mbps
• Physical layer: 10BaseT, 100BaseTX
• Cable length: 100 m (max)
• Connector: Shielded RJ45

MSTP Communications

• Compliance: ANSI/ASHRAE 135 (ISO 16484-5)
• Protocols supported: BACnet MS/TP
• Data rate: 9600, 19200, 38400, 76800 bps
• Physical layer: EIA-485, 3-wire isolated
• Cable Length: 1200 m (max), 1000 m if using 115.2 kbps
• Connector: 5-pin removable terminal

LEDs

• Link L:
• Green = 100 Mbps
• Yellow = 10 Mbps
• Flashing = activity
• Duplex D:
• Green = Full-duplex
• Off = Half-duplex
• Flashing = Collision
• 
  
• TX, RX: Green = activity

Power

• 24 VAC ±10% 10 VA 47–63 Hz or 24 VDC ±10% 6 W

Envrionmental

• Operating temperature: 0°C to 60°C
• Storage temperature: -40°C to 85°C
• Relative Humidity: 10–95%, non-condensing

Mechanical

• Dimensions: 96 mm x 41 mm x 131 mm
• IP protection: IP30
• Mount: DIN rail or Panel mount

Certificates:

• CE Mark; CFR 47, Part 15 Class A; RoHS
• UL 508 C22.2 No. 142-M1987

Manufacturer's warranty: 36 months

---