3-4 days
Industrial CANopen to Modbus RTU slave (RS232 or RS485) converter, housing type A (slim), DIN rail mount.
HD67002 allows you to connect a CANopen network with a Modbus RTU Master (for example a PLC, HMI, etc.) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67002 software.
Configuration:
Thanks to SW67002 software on your PC you can:
- Define that the SDO of the CANopen are accessible from Modbus
- Define how to update SDO in CANopen from Modbus
- Define that the EMCY of the CANopen are accessible from Modbus
- Define how and which EMCY generated in CANopen can be filtered
- Define which and how the PDO of CANopen are accessible from Modbus
- Update the new configurations of the device
- Save, duplicate, modify, export the configurations
Characteristics:
- Two-directional information between networks CANopen and ModBUS
- Electrical isolation between two BUSes
- Write SDO from ModBUS Word
- Read EMCY, SDO and PDO from ModBUS Word
Specifications:
- Ports: 1x CANopen; 1x RS-485; 1x RS-232
- CAN 2.0 connector: Terminal block
- RS-485 connector: Terminal block
- RS-232 connector: D-SUB9
- Data Rates CANopen: From 10K to 1Mbps
- Data Rates Modbus: Up to 115 Kbps
- Power supply: 10...19VAC ; 10...35VDC
- Operating temperature: -40°C/+85°C (-40°F/+185°F)
- Dimensions: 120x23x107mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67002
- ORDER CODE: HD67002
Manufacturer's warranty: 24 months
Download the software for this model HERE
General technical parameters | |
CAN ports | 1x CAN |
Serial port | 1x RS-485, 1x RS-232 |
Protocol support | CANopen, Modbus RTU |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 10~19VAC, 10~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!