3-4 days
Industrial converter allows you to integrate a EtherCAT Slave with a S7Comm Client
The HD67E28-A1 is a EtherCAT / S7comm Converter and it allows to publish and get the data from/to a Siemens PLC (or equivalent) to a EtherCAT Gateway in order to exchange the informations between the networks without changing the configuration and stopping the automation of the PLC.
Configuration:
You need Compositor SW67E28 software on your PC in order to perform the following:
- Define the parameters of EtherCAT line
- Define the parameters of S7comm line
- Define EtherCAT variables to read and write
- Define the S7comm requests to send to the S7comm servers
- Export the ESI file for configuration of EtherCAT Master
- Update the device
Characteristics:
- Very easy to configure
- Triple Electrical isolation
- Temperature range: -40°C/+85°C (-40°F/+185°F)
Specifications:
- Isolation between EtherCAT – S7comm Client – Power Supply
- Two-directional information between EtherCAT bus and S7comm bus
- Mountable on 35mm Rail DIN
- Wide power supply input range: 8…24V AC or 12…35V DC
- Wide temperature range: -40°C / 85°C [-40°F / +185°F]
- Software: SW67E28
- ORDER CODE: HD67E28-A1
Configurator - Software SW67E28 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
Protocol support | EtherCAT, S7comm |
Industrial grade | |
Casing | Plastic |
IP rating | IP20 |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!