CAN104-DN

Interfaces PC/104 Computers to the CAN Network.

The Philips SJA1000 CAN stand-alone controller chip provides new degrees of functionality for the CAN104 at a low cost. By not incorporating a co-processor, the CAN104 is a cost-effective and high-performance solution for automotive and industrial applications.

The SJA1000 keeps pace with the industry with its many capabilities-more than its predecessor, the older 82C200. It is backward compatible with the 82C200. The 82C200 is restricted to BasicCAN (11-bit identifiers) while the SJA1000 operates in either BasicCAN or PeliCAN which supports the CAN 2.0B specification (29-bit identifiers). The SJA maintains extended frame passivity while in the BasicCAN mode.

This controller chip is designed with a 16 MHz clock, a larger receive buffer and a better acceptance-filtering-including the ability to extend the acceptance mask to the data field. It has the ability to operate at data rates up to 1 Mbps.

The PeliCAN mode has these features: error counters with read/write access; programmable error warning limit; last error code register; error interrupt for each CAN-bus error; arbitration lost interrupt with detailed bit position; single-shot transmission (no retransmission); listen-only mode (no acknowledge, no active error flags); acceptance-filter extension (4-byte mask); and reception of "own" messages (self-reception request).

The CAN104 adapter incorporates the DeviceNet physical layer with optically-isolated transceiver, reverse-voltage and short-circuit protection. Field connectors include the DeviceNet 5-position open-style and DE-9 as defined by CAN in Automation (CiA).

Features:

• Interfaces CAN to PC/104 compatible computers
• Highly-featured Philips SJA1000 controller
• Compatible PCA82C200 mode (defaults to BasicCAN mode)
• Extended receive buffer (64-byte FIFO)
• CAN 2.0B protocol compatibility
• Supports both 11-bit and 29-bit identifiers
• 16 MHz clock frequency
• Drivers available for Windows® 98/ME/2000/XP, Linux and DOS
• Choice of either open-style screw terminals or DB-9 connector
• Data rates up to 1 Mbps

Specification:

Envrionmental

• Operating temperature: 0°C to 60°C
• Storage temperature: -40°C to 85°C

Power

• +5V, 150 mA

Functionality

• Data rate: up to 1 Mbps
• Connectors: Male DB9 and 5-position screw terminals are provided for CAN connection
• I/O mapping - BasicCAN: In BasicCAN mode, the CAN104 can occupy any of the following 32-byte blocks of I/O space:
• 000 020 040 060 080 0A0 0C0 0E0 100 120 140 160 180 1A0 1C0 1E0
• 200 220 240 260 280 2A0 2C0 2E0 300 320 340 360 380 3A0 3C0 3E0
• I/O mapping - PeliCAN: In PeliCAN mode, the CAN104 can occupy any of the following 128-byte blocks of space:
• 000 080 100 180 200 280 300 380
• Interrupt lines: Support selection of IRQ2 through IRQ15
• Compliance: CAN2.0A and CAN2.0B

Mechanical

• Dimensions: 90 mm x 95 mm
• Shipping weight: 0.45 kg

Manufacturer's warranty: 24 months

---