5-10 days
10W Single Output Industrial DIN Rail Power Supply.
DIN rail mounted power supply unit with 24VDC output voltage, 10W power, 0,42A output current and fanless cooling.
Features:
- Universal AC input/Full range
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- NEC class 2 / LPS compliant
- 100% full load burn-in test
- No load power consumption < 0.75W
Specification:
Power supply
- Output:
- DC Voltage: 24V
- Rated Current: 0.42A
- Current Range: 0 ~ 0.42A
- Rated Power: 10W
- Ripple & Noise (max.): 150mVp-p
- Voltage tolerance: +/- 2.0%
- Line Regulation: +/- 1.0%
- Load Regulation: +/- 2.0%
- Setup, Rise Time: 1000ms, 30ms/115VAC at full load; 500ms, 30ms/230VAC
- Hold up time (typical): 25ms/115VAC at full load; 120ms/230VAC
- Input:
- Voltage Range: 85 ~ 264VAC; 120 ~ 370VDC
- Frequency range: 47 ~ 63Hz
- Efficiency (typical): 84%
- AC Current (typical): 0.33A/115VAC; 0.21A/230VAC
- In Rush Current (typical): Cold Start 35A/115VAC; 70A/230VAC
- Leakage Current: <1mA / 240VAC
Protection
- Overload: Above 105% rated output power
- Protection type: Hiccup mode, recovers automatically after fault condition is removed
- Over Voltage: 27.6 ~ 32.4V
- Protection type: Shut down o/p voltage, re-power on to recover
Function
- DC OK Active Signal (max.): 18 ~ 27V / 20mA
Safety & EMC
- Safety Standards: UL508, TUV EN60950-1 approved, NEC class 2 / LPS compliant
- Withstand Voltage: I/P-O/P:3KVAC; I/P-FG:1.5KVAC; O/P-FG:0.5KVAC
- Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
- EMI Conduction & Radiation: Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B
- Harmonic Current: Compliance to EN61000-3-2,-3
- EMS Immunity: Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-1, EN61204-3, light industry level, criteria A
Environmental Characteristics
- MTBF: 584.000 h
- Weight: 0,17 kg
- Dimensions (W x D x H): 22.5mm x 90mm x 100mm
- Operation Temperature: -20°C ~ 70°C (Refer to output load derating curve)
- Storage Temperature: -40°C ~ 85°C
- Humidity: 20% to 90% while working; 10% to 95% storage
- Vibration: Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
Warranty: 36 months
ORDERING INFORMATION: MDR-10-24
General technical parameters | |
Power | 10W |
Output current | 0.42A |
Output voltage | 24VDC |
Industrial grade | |
Operating temperature | -20°C to 70°C |
Input voltage | 85~264VAC, 120~370VDC |
Manufacturer's warranty | 36 months |
Mount | DIN rail |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!