Shipping 24h
Test for Free!
40W Single Output Industrial DIN Rail Power Supply.
DIN rail mounted power supply unit with 24VDC output voltage, 40W power, 1.7A output current and fanless cooling.
Features:
- Universal AC input/Full range
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Class I, Div 2 Hazardous Locations T4
- DC OK relay contact
- 100% full load burn-in test
- No load power consumption < 0.75W
Specification:
Power supply
- Output:
- DC Voltage: 24V
- Rated Current: 1.7A
- Current Range: 0 ~ 1.7A
- Rated Power: 40.8W
- Ripple & Noise (max.): 150mVp-p
- Voltage Adj. Range: 24 ~ 30V
- Voltage tolerance: +/- 1.0%
- Line Regulation: +/- 1.0%
- Load Regulation: +/- 1.0%
- Setup, Rise Time: 500ms, 30ms/230VAC; 500ms, 30ms/115VAC at full load
- Hold up time (typical): 50ms/230VAC; 20ms/115VAC at full load
- Input:
- Voltage Range: 85 ~ 264VAC; 120 ~ 370VDC
- Frequency range: 47 ~ 63Hz
- Efficiency (typical): 88%
- AC Current (typical): 1.1A/115VAC; 0.7A/230VAC
- In Rush Current (typical): Cold Start 30A/115VAC; 60A/230VAC
- Leakage Current: <1mA / 240VAC
Protection
- Overload: 105 ~ 150% rated output power
- Protection type: Constant current limiting, recovers automatically after fault condition is removed
- Over Voltage: 31.2 ~ 36V
- Protection type: Shut down o/p voltage, re-power on to recover
Function
- DC OK Active Signal: Relay contact rating (max.): 30V/1A resistive
Safety & EMC
- Safety Standards: UL508, TUV EN60950-1, TUV EN60950-1, Class I, Div. 2 Group A, B, C, D Hazardous Locations T4 approved
- Withstand Voltage: I/P-O/P:3KVAC; I/P-FG:2KVAC; O/P-FG:0.5KVAC
- Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25°C/70% RH
- EMC Emission: Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
- EMC Immunity: Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
Environmental Characteristics
- MTBF: 301.700 h
- Weight: 0,3 kg
- Dimensions (W x D x H): 22.5mm x 90mm x 100mm
- Operation Temperature: -20°C ~ 70°C (Refer to output load derating curve)
- Storage Temperature: -40°C ~ 85°C
- Humidity: 20% to 90% while working; 10% to 95% storage
- Vibration: Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
Warranty: 36 months
ORDERING INFORMATION: MDR-40-24
General technical parameters | |
Power | 40W |
Output current | 1.7A |
Output voltage | 24VDC |
Industrial grade | |
Operating temperature | -20°C to 70°C |
Input voltage | 85~264VAC, 120~370VDC |
Manufacturer's warranty | 36 months |
Mount | DIN rail |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!