EIPE-2
5-10 days
Industrial Skorpion PoE Mid-Span Splitter with 1 Fast Ethernet port and 1 PoE port.
The EIPE-2 Splitter has two RJ-45 connectors. The upper connector attaches to the upstream device. The lower one attaches to the end device. Transmit and receive signals pass between the two connectors as if the mid-span device were not present.
The EIPE-2 Splitter is powered by 48 VDC which it uses to internally generate the 24 VDC power for the non-PoE device and eliminate any concerns about grounded primary power. The maximum output power is 10 watts.
Features:
- 1 10/100BaseT(X) Ethernet port and 1 10/100BaseT(X) PoE port
- 48VDC power input
- 24 VDC, 10 W power output
- IEEE 802.af compliant
- DIN-rail mounting
- Rugged metal enclosure
Specification:
Ethernet Communications
- IEEE 802.3 10/100 Mbps data rate
- 10BASE-T, 100BASE-TX physical layer
- 100 m (max) CAT5 cable length total for both cables
LEDs
- 48V IN: Green = acceptable input power applied
- 24V OUT: Green = acceptable output power available
Power
- Input: 48 VDC±10% 12.95 W (via the RJ-45 port)
- Output: 24 VDC±10% 10W minimum
Envrionmental
- Operating temperature: 0°C to 60°C
- Storage temperature: -40°C to 85°C
- Relative Humidity: 10–95%, non-condensing
Mechanical
- Dimensions: 70 mm x 26 mm x 100 mm
- IP protection: IP30
- Mounting: TS-35 DIN Rail
Certificates:
- CE Mark; CFR 47, Part 15 Class A; RoHS
- UL 508; c-UL 508
Manufacturer's warranty: 36 months
General technical parameters | |
Ethernet | 1x 10/100BaseT(X), 1x 10/100BaseT(X) PoE |
Industrial grade | |
Casing | Metal |
IP rating | IP30 |
Operating temperature | 0°C to 60°C |
Input voltage | 48VDC |
Manufacturer's warranty | 36 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!