Menu
Your Cart

EISK5-100TF

EISK5-100TF
5-10 days
EISK5-100TF
1 246,45 zł

Available Options

Industrial Unmanaged Switch with 4 Ethernet ports and 1 Fiber port.

The EISK5-100T/F Skorpion Switch is a five-port unmanaged Ethernet switch that provides 100 Mbps performance on all ports in order to accommodate a range of control devices and workstations commonly found in an automation project. Four of the ports are copper ports with RJ-45 connectors while one port is either a single-mode or multimode fibre port. For 10 Mbps legacy copper devices, the switch will automatically reduce its port-speed accordingly. This low-cost compact unit utilizes a rugged metal enclosure and is intended for installation in control panels using DIN-rail mounting.

This is a plug-and-play Ethernet switch requiring no configuration. All copper ports automatically configure their data rate and duplex using the Auto-negotiation protocol. Depending on the capability of the link partner, communication is set at 10 or 100 Mbps and at either half- or full-duplex. Each copper port will accommodate either a straight-through or crossover cable by using the Auto-MDIX protocol. The fibre port is preset for 100 Mbps full-duplex operation in order to achieve the highest performance.

The unit is powered from a choice of low-voltages (AC or DC). Redundant power connections are provided for back-up power schemes. LED indicators assist in troubleshooting network issues.

Features:

  • Plug-and-Play operation
  • 4 10/100BaseT(X) Ethernet ports and 1 10/100Base-FX Fiber port
  • Single-mode or multimode fibre
  • Shielded RJ-45 connectors
  • Auto-negotiation of speed and duplex
  • Auto-MDIX supports cable inversion
  • DIN-rail mounting
  • Rugged metal enclosure
  • 24 VAC/VDC powered

Specification:

Ethernet Communications

  • IEEE 802.3 10/100 Mbps data rate using RJ-45 connectors, 100 m (max)
  • IEEE 802.3 100BASE-FX using either ST or SC connectors:
    • Multimode: 2 km maximum cable length
    • Single-mode: 15 km maximum cable length

LEDs

  • Power: Green = power OK
  • "L" LEDs:
    • Green = 100 Mbps communication established
    • Yellow = 10 Mbps communication established
    • Flashing = data transmissions occurring
  • "D" LEDs:
    • Green = Full-duplex communication established
    • Off = Half-duplex communication established

Power

  • 10–36 VDC 3 W or 24 VAC ±10% 6 VA 47–63 Hz

Envrionmental

  • Operating temperature: 0°C to 60°C
  • Storage temperature: -40°C to 85°C
  • Relative Humidity: 10–95%, non-condensing

Mechanical

  • Dimensions: 138 mm x 26 mm x 70 mm
  • Shipping weight: 0.45 kg
  • IP protection: IP30
  • Mounting: TS-35 DIN Rail

Certificates:

  • CE Mark; CFR 47, Part 15 Class A; RoHS
  • UL 508 Industrial Control Equipment

Manufacturer's warranty: 5 years


General technical parameters
Ethernet 4x 10/100BaseT(X)
Fiber mode Single-mode, Multi-mode
Fiber 1x 10/100Base-FX
Industrial grade
Casing Metal
IP rating IP30
Operating temperature 0°C to 60°C
Input voltage 24VAC, 24VDC, 10~36VDC
Manufacturer's warranty 5 years
Mount DIN rail

Write a review

Note: HTML is not translated!
Bad Good

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.