EISX8-100TF (EOL)

Compact Unmanaged Ethernet Switch with 6 Fast Ethernet ports, 2 Fiber port and wide operating temperature range from -40°C to 75°C.

EISX switches, supporting both copper and fibre optics, answer the call for those industrial and commercial applications requiring a small footprint and extended temperature range from –40°C to +75°C. This series is ideal for situations whereoutdoor temperatures are expected and compact size is a necessity.

Each unit segments the Ethernet LAN into multiple collision domains, acting as a "bridge" between data links to create a larger network diameter than possible with repeating hubs. Each copper port automatically negotiates data rate, duplex, and flow control.

The switch learns port assignments by reading Ethernet frames and logging source addresses into a table which can hold over 4,000 addresses. With this information it improves throughput by restricting traffic to only those ports party to adata exchange—while other data is simultaneously exchanged on other ports. Store-and-forward operation of frames is implemented using 256 kB of built-in memory.

Only standard straight-through cables are needed to connect copper ports to NIMs or another hub. Eight (MDIX) copper ports are available on the EISX9-100T for attaching local devices with the ninth copper port being used as an uplink port. In addition to one power LED, each port has an LED showing link/activity/data rate by colour: green for 100 Mbps and yellow for 10 Mbps. Flashing indicates port activity.

Each unit accepts wide-range, low-voltage AC or DC power and has terminals for redundant power.

The unit is shipped with a DIN-rail clip installed. If direct mounting to a sub-panel is desired, an optional panel mounting bracket, shipped with the product, can be installed after removing the DIN rail clip.

Features:

• 6 10/100BaseT(X) Ethernet ports and 2 100Base-FX fiber port
• Industrial temperatures: -40°C to +75°C
• Provisions for redundant power connections
• Auto-MDIX on copper ports
• DIN-rail and panel-mountable versions
• Auto-negotiated data rate, duplex, and flow control on copper ports
• Full- or half-duplex operation on copper ports

Specification:

Ethernet Communications

• Number of ports: 6
• Interface: 10/100BaseT(X), 10 or 100 Mbps, Auto-negotiated data rate, flow control, full- or half-duplex mode and Auto-MDIX cable connection
• Connector: Shielded RJ45
• Max segment length: 100m
• Flow control: Half-duplex (backpressure)
• Aging: 300 s

Fiber Communications

• Number of ports: 2
• Interface: 100Base-FX, 100 Mbps, Full-duplex mode
• Connectors:
• SC (on multimode or single-mode models)
• ST (only on multimode models)
• Max segment length:
• 2 km (multimode), optical budget: 13 dB
• 15 km (single-mode), optical budget: 19 dB
• Flow control: Full-duplex (PAUSE)

LEDs

• Power: Green
• Port LEDs:
• Ethernet:
• Green - 100 Mbps
• Yellow - 10 Mbps
• Green Flashing - Activity
• Fiber:
• Green - 100 Mbps link
• Flashing - Activity

Power

• Input voltage: 10~36VDC / 8~24VAC
• Input power (max): 6W / 6VA
• Input frequency: 47-63Hz

Envrionmental

• Operating temperature: -40°C to 75°C
• Storage temperature: -40°C to 85°C
• Relative Humidity: 10–95%, non-condensing

Mechanical

• Dimensions: 95 mm x 95 mm x 76 mm
• IP protection: IP30
• Mounting: Panel mount or DIN rail mount

Manufacturer's warranty: 36 months

---