5-10 days
ES5010G-2GS-8POE-150W EOL
- Stock: 5-10 days
- Model: ES5010G-2GS-8POE-150W
0,00 zł
Managed, 10-Port Industrial Ethernet Switch with 8 PoE Ports, 2 SFP Ports, 230VAC Power Supply and Temperature Range from -10°C to 60°C.
The product has been phased out.
With data and power supported by one unit, the ES5010G-2GS-8POE-150W shall reduce cables and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. Auto PoE detection and Plug and play installation makes ES5010G-2GS-8POE-150W-P(220VAC) Gigabit PoE Switch easy to use and with clear LED indicators to tell the working condition.
Features:
- Compatible with both IEEE802.3at (30W) and IEEE802.3af (15.4W)
- Automatically detect and supply power to IEEE802.3at and IEEE 802.3af compliant powered devices (PDs)
- Advanced SAFC function, only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging
- other private standard POE devices or devices without POE function
- Support port power supply prioritization, guarantee the continuous power supply of key nodes
- Up to 100m network cable transmitting distance
- Built-in PSE power supply module, plug-and play design, easy to install
- High security performance defending against power surge
- Support short-circuit protection function
- Energy-saving green design, support auto-switch to standby mode and auto-detect cable length
- Support simple WEB management, easy to configure the functions of switches
Specification:
Technology:
- Standard and Protocols: IEEE 802.3af, Power Over Ethernet, IEEE 802.3at, Power Over Ethernet Plus, IEEE 802.3u, 100BASE-TX, IEEE 802.3ab, 1000 BASE-T, IEEE 802.3z, 1000 BASE-X, IEEE 802.3ad, Static or Dynamic Link Aggregation, IEEE 802.3x, Full-Duplex Flow Control, IEEE 802.3az, EEE (Energy Efficient Ethernet), IEEE 802.1q, VLAN, IEEE 802.1p, QoS/CoS、IEEE 802.1d, STP (Spanning Tree Protocol), IEEE 802.1w, Rapid Spanning Tree Protocol, IEEE 802.1s, Multiple Spanning Tree Protocol
- POE Standard: IEEE802.3af/at
- Port Flow control: Back-pressure traffic control under Half-Duplex mode, IEEE 802.3x traffic control under Full-Duplex mode
Ports:
- Fixed ports: 8x 10/100/1000M PoE Ports + 2x Gigabit SFP slots
- PoE Pin-out: 1/2(+), 3/6(-); Customized 4/5(+), 7/8(-)
Exchange Properties:
- 100M forwarding rate: 1488095pps
- 100M forwarding rate: 148809pps
- 10M forwarding rate: 14880pps
- Transmit type: Full wire-speed storage and forwarding
- MAC address: 8K, Support auto-update, two-way learning
- VLAN: Port-based VLANs\ Port-protocol-based VLANs \ ACL-based VLANs, 4K-entry Vlan Table, Supports flexible Q-in-Q and Vlan Tag function, VLANs based on IEEE 802.1q
- Switching Capacity: ≥9.2Gbps
- Spanning Tree: Spanning Tree Protocol, Rapid Spanning Tree Protocol (RSTP), Support Multiple Spanning Tree Protocol
- Link Aggregation:Support 8 aggregation groups, and a maximum of 8 ports in each aggregation group
- Port Mirroring:Support bi-direction port mirroring, RSPAN function for remote mirroring
- Port Isolation:Isolation between downlink ports without influence the communication between downlink and uplink ports
- Port Flow Control: Back-pressure traffic control under Half-Duplex mode, IEEE 802.3x traffic control under Full-Duplex mode
- Port Rate Restriction: Port-based ingress or egress rate limiting
- Storm Suppression: Support the suppression of broadcast storm based on forwarding rate
- Multicast Control: Support IGMPv1/2/3 and MLDv1/2 Snooping
- Security: 1.5K entry ACL Table
- Attack Prevention (Land attack\Blat attack\Ping attack\TCP control flag attack), MAC & Port based Security, 802.1x port based security, TCP/UDP port based Security
- QOS: SP (Strict Priority), WFQ (Weighted Fair Queuing), WRR (Weighted Round Robin), 802.1p (Port Queuing Priority), Differentiated Service Code Point (DSCP Priority)
- IPv6: IPv6 Parsing
- PoE ouput priority Management: Supported
Physic Medium:
- 10/100Base-TX: UTP category 3/4/5 cables (Maximum 100m)
- 1000Base-T: UTP Category 5 cable (Maximum 100m)
- 1000Base-SX: fiber with 850nm wavelength, supports a max transmission distance of 550m
- 1000Base-LX: fiber with 1310nm / 1550nm wavelength, supports a max transmission distance of 80km
- Network Cable Deployment: Support Auto-MDIX function, automatically identify straight forward cable and cross-over cable
- Negotiation Pattern: Support port auto-negotiation function (automatically negotiate transmission rate and Duplex modes)
- PHY Detection: Detect the connectivity of network cables
- Maintenance: Detect the connectivity of network cables,Uploading or downloading of the configuration data, Uploading of upgrade patch, Support system logs, WEB-based reset to factory defaults, support system logs
- Management: Support WEB-based management
Indicator light:
- Interface light: Link/Act, POE Status
- Power light: PWR
Power:
- Input Power Supply: 90 ~ 264VAC/50 ~ 60Hz/150W
- Energy Saving: Comply with "EEE" (Energy Efficient Ethernet)
Working Environment:
- Working Temperature: -10°C ~ 60°C
- Storage Temperature: -40°C ~ 70°C
- Operation Humidity: 10% ~ 90% (non-condensing)
- Storage Humidity: 5% ~ 95% (non-condensing)
Mechanical Properties:
- Weight: <2kg
- Dimensions (LxWxH): 280mm x 180mm x 44mm
Warranty: 3 years
General technical parameters | |
Ethernet | 8x 10/100/1000BaseT(X) PoE |
I/O | 1x relay output |
Fiber | 2x 10/100/1000Base (SFP) |
Industrial grade | |
Casing | Metal |
IP rating | IP30 |
Operating temperature | -10°C to 60°C |
Input voltage | 90~264VAC |
Manufacturer's warranty | 3 years |
Mount | RACK |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!