FJ-AC-KNX-16 (INKNXFGL016O000) EOL

Fujitsu VRF systems to KNX Interface.

The newer version of this device is IN775FGL00SO000

The INKNXFGL016O000 is directly connected to the outdoor units communication bus and enables the control of all the indoor units connected to the system. This allows not only the control and monitoring of the main AC functions but the access to some internal variables of the outdoor units. The configuration is carried out using the Intesis® MAPS software. This one allows you to define your own settings for the device and offers extra functions available for all the new generation gateways. Thanks to the scan function, which allows to automatically discover all the units available in the installation, get the interface ready to work in a really short time. Intesis MAPS makes it easy to identify any malfunction in the installations thanks to its robust diagnostic feature.

Features:

• UL Certified
• Direct access to outdoor unit’s communication bus
• Scan: Automatic identification of the units presents in the VRF system
• Outdoor unit’s signals available for the integration
• Supports KNX standard datapoints (DPTs) that guarantees a seamless integration with any KNX device or system
• Wide range of monitoring & control datapoints available
• Datalogging through external USB port
• Configuration through IP or USB (Console) port
• Front cover LED indicators to provide easy to check communication status on both the Ethernet and serial ports
• Automatic updates for both Intesis MAPS and interface’s firmware

Specification:

• Enclosure:
  • Plastic, type PC (UL 94 V-0)
  • Net dimensions (dxwxh): 90x88x56 mm
  • Recommended space for installation (dxwxh): 130x100x100mm
  • Color: Light Grey. RAL 7035
• Mounting: Wall; DIN rail EN60715 TH35
• Power: 1 x Plug-in screw terminal block (3 poles)
  • 9 to 36VDC +/-10%, Max.: 140mA
  • 24VAC +/-10% 50-60Hz, Max.: 127mA
  • Recommended: 24VDC
• Ethernet:
  • 1 x Ethernet 10/100 Mbps RJ45
  • 2 x Ethernet LED: port link and activity
• Port A:
  • 1 x KNX TP-1 Plug-in screw terminal block orange (2 poles)
  • 1 x Plug-in screw terminal block green (2 poles)
• Switch A (SWA): 1 x DIP-Switch for PORT A configuration
• Port B:
  • 1 x Serial EIA232 (SUB-D9 male connector)
  • 1 x Fujitsu Plug-in screw terminal block (3 poles)
• Switch B (SWB): 1 x DIP-Switch for PORT B configuration
• Battery:
  • Size: Coin 20mm x 3.2mm
  • Capacity: 3V / 225mAh
  • Type: Manganese Dioxide Lithium
• Console Port: Mini Type-B USB 2.0 compliant; 1500VDC isolation
• USB port:
  • Type-A USB 2.0 compliant
  • Only for USB flash storage device (USB pen drive)
  • Power consumption limited to 150mA (HDD connection not allowed)
• Operation Temperature: 0°C to 60°C
• Operational Humidity: IP20 (IEC60529)

Warranty: 36 months

---