FJ-RC-MBS-1 (INMBSFGL001R000) - Fujitsu RAC and VRF systems to Modbus Interface
3 year warranty
5-7 days
FJ-RC-MBS-1 (INMBSFGL001R000) - Fujitsu RAC and VRF systems to Modbus Interface
- Stock: 5-7 days
- Brand: Intesis
- Model: FJ-RC-MBS-1
1 170,30 zł
2 pieces or more 1 111,79 zł
5 pieces or more 1 088,38 zł
10 pieces or more 1 053,27 zł
26 pieces or more 994,76 zł
51 pieces or more 889,43 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.
By the same series
3 year warranty
5-7 days
Brand: Intesis
Model: FJ-AC-MBS-1
Fujitsu RAC and VRF systems to Modbus RTU Interface (to CN connector). The Fujitsu-Modbus gateway INMBSFGL001I000 allows fully bi-directional communic..
1 264,30 zł
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates (if available for the model)
- Test Reports (if available for the model)
Fujitsu RAC and VRF systems to Modbus Interface.
IntesisBox FJ-RC-MBS-1 INMBSFGL001R000 allows monitoring and control, fully bi-directionally, all the functioning parameters of Fujitsu VRF Air Conditioners into Modbus RTU (RS-485) networks.
The gateway is wired directly to an indoor unit. This allows not only the control of the main AC functions such as operating mode, fan speed, temperature setpoint…but the monitoring of errors, alarms and some internal variables. The INMBSFGL001R000 can be installed and set up in a really short time. It’s only a matter of wiring the gateway to the AC unit and configure the DIP-SW accordingly. No configuration software and no power supply are required. The consistent Modbus register mapping used for all AC brands, helps improving the integration time of each project.
Features:
- Reduced dimensions
- Quick and easy installation
- External power not required
- Direct connection to Modbus RTU (EIA485) networks. Up to 63 FJ-RC-MBS-1 devices can be connected in the same network
- Direct connection to the AC indoor unit
- Configuration from both on-board DIP-switches and MODBUS RTU
- Total Control and Supervision
- Real states of the AC unit's internal variables
- Allows using simultaneously the IR remote control and MODBUS RTU
Specification:
- Dimensions: 93 x 53 x 58 mm
- Weight: 85 g
- Consumption Current: 80 mA
- Operating Temperature: -40°C to 85°C
- Stock Temperature: -40°C to 85°C
- Operating Humidity: <95% RH, non-condensing
- Stock Humidity: <95% RH, non-condensing
- Isolation voltage: 1000 VDC
- Isolation resistance: 1000 MΩ
- Modbus Media: Compatible with Modbus RTU - EIA485 networks
Warranty: 36 months
