HD67029-B2-232-80

Industrial MBus to Modbus RTU Converter, Master MBus: up to 80 slaves - Modbus Slave Port: RS-232).

The converter for communication with meters uses the MBus, RS-232 connector is used for Modbus RTU communication. The HD67029M-232-80 converter can read up to 80 MBus receivers of any type (eg water meters, gas meters, energy meters). Converter is easy to configure thanks to free SW67029 software.

New converter functionality - automatic scan of MBus receivers

There is no longer need to consult the manufacturer or analyze the protocol frame from the MBus counter - everything will be handled for you our dedicated software SCAN&DECODE!

To facilitate the installation of already easy-to-use ADFweb MBus converters, the manufacturer has developed dedicated software that automatically scans the MBus and decodes all the registers contained in the telegram. In practice, this means fast installation of converters and trouble-free system setup.

SCAN&DECODE - quick manual

We have also provided you with a very brief description of the functionality, which is available for download at the CONSTEEL Electronics store documentation.

Configuration:

Thanks to the SW67029 software on your PC you can:

• Define the parameter of Modbus line
• Define the communication parameters of MBus
• Define which M-Bus variables are readable on Modbus
• Update the device

Characteristics:

• Galvanic isolation between RS232C/RS485 and MBus
• Baud Rate and Parity changeable with software
• Mountable on 35mm DIN Rail

Specification:

• Ports: 1x MBus; 1x RS-232
• Data Rates MBus: Up to 38400 bps
• Data Rates Modbus RTU: Up to 115200 bps
• Power supply: 15...21VAC ; 18...35VDC
• Operating temperature: -40°C/+70°C (-40°F/+158°F)
• Dimensions: 106 mm x 58 mm x 95 mm (DxWxH)
• Weight: 200g approx
• Maximum power consumption at converter start-up: 30W
• Mechanical fixing: DIN Rail mount
• Software: SW67029
• ORDER CODE: HD67029-B2-232-80

Configurator - Software SW67029_40_80_160_250 FREE DOWNLOAD

Manufacturer's warranty: 24 months

Each MBus converter available in our offer is easy to mount on DIN rail, immunity to electromagnetic interference and the possibility of installation in outdoor boxes and environments with a wide operating temperature range from -40°C to 85°C. Our M-Bus converters are versatile devices designed to work in a variety of industrial environments.

MBus (Meter-Bus) is the European standard for reading a wide range of consumer meters. Because the MBus consists of a protocol layer and an electrical interface, in most cases, an additional external converter is needed to read the meter with an MBus. Converters with MBus interface are used to read meter data such as gas meters, electricity meters, water consumption meters, etc.

---