HD67812-KNX-485-B2
3-4 days
Industrial Modbus RS485 master to KNX TP converter, housing type B (wide), DIN rail mount.
HD67812 allows to communicate KNX TP with RS485 Modbus RTU devices like SCADA, HMI or Modbus controllers. Converter is easy to use thanks to free SW67812 software.
Configuration:
Thanks to the SW67812 software on your PC you can:
- Define the parameters of Modbus line
- Define the parameters of KNX line
- Define the KNX messages that the Converter can accept
- Define the KNX frames that the Converter sends through the KNX line
- Define the map of KNX byte that must be written in the Modbus side
- Define the map of which Modbus registers must be written in KNX messages
- Update the device
Characteristics:
- Up to 1440 bytes in reading and 1440 bytes in writing
- Triple isolation between KNX - Power Supply, KNX – Serial, Power Supply - Serial
- Bi-directional information exchange between KNX bus and Modbus bus
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 1x KNX; 1x RS-485
- KNX protocol: KNX TP
- Modbus protocol: Modbus RS-485 Master
- Data Rates KNX: 9600 bit/s
- Data Rates Modbus: Up to 115200 bit/s
- KNX connector: KNX Bus connector
- Modbus connector: 3way 5mm terminal block
- Power supply: 8...24VAC; 12...35VDC
- Power supply connector: 2way 5mm terminal block
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67812
- ORDER CODE: HD67812-KNX-485-B2
Configurator – Software SW67812 FREE DOWNLOAD
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
