HD67821-KNX-B2

Industrial DMX to KNX Converter, housing type B (wide), DIN rail mount.

HD67821-KNX-B2 allows you to connect some DMX devices (for example a Light System...) with an KNX network (for example some sensors, dimmers, KNX smart HOME System...) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67821 software.

Configuration:

Thanks to the SW67821 software on your PC you can:

• Define the parameters of KNX line
• Define the KNX messages that the Converter can accept
• Define the KNX frames that the Converter sends through the KNX line
• Define the map of KNX byte that must be written in the DMX side
• Update the device

Characteristics:

• Up to 512 bytes on DMX side
• Triple isolation between KNX - Power Supply, KNX – Serial, Power Supply - Serial
• Mono-directional information exchange between KNX bus and DMX bus
• Mountable on 35mm Rail DIN

Specifications:

• Ports: 1x RS485; 1x KNX
• KNX Protocol: KNX TP
• RS485 Protocol: DMX512
• Data Rates KNX: 9600 bps
• Data Rates DMX: 250 kbps
• KNX connector: KNX Bus connector
• DMX connector: 3way 5mm terminal block
• Power supply: 8...24VAC; 12...35VDC
• Power supply connector: 2way 5mm terminal block
• Operating temperature: -40°C to +85°C (-40°F to +185°F)
• Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
• Weight: 200g approx
• Mechanical fixing: DIN Rail mount
• Software: SW67821
• ORDER CODE: HD67821-KNX-B2

Configurator – Software SW67821 FREE DOWNLOAD

---