HI-RC-MBS-1 (INMBSHIT001R000)

Hitachi VRF systems to Modbus Interface.

IntesisBox HI-RC-MBS-1 INMBSHIT001R000 allows monitoring and control, fully bi-directionally, all the functioning parameters of Hitachi VRF Air Conditioners into Modbus RTU (RS-485) networks.

The INMBSHIT001R000 gateway is wired directly to an indoor unit. This allows not only the control of the main AC functions such as operating mode, fan speed, temperature setpoint…but the monitoring of errors, alarms and some internal variables.

The product can be installed and set up in a really short time. It’s only a matter of wiring the gateway to the AC unit and configure the DIP-SW accordingly. No configuration software and no power supply are required. The consistent Modbus register mapping used for all AC brands, helps improving the integration time of each project.

Features:

• Reduced dimensions
• Quick and easy installation
• External power not required
• Direct connection to MODBUS RTU (RS-485) networks. Up to 63 HI-RC-MBS-1 devices can be connected in the same network.
• Direct connection to the AC indoor unit
• Configuration from both on-board DIP-switches and MODBUS RTU
• Total Control and Supervision
• Real states of the AC unit's internal variables
• Allows using simultaneously the IR remote control and MODBUS RTU

Specification:

• Dimensions: 93 mm x 53 mm x 58 mm
• Weight: 85 g
• Mounting:
• Wall
• DIN rail EN60715 TH35
• Modbus port: 1x EIA485 Compatible with Modbus RTU
• LED indicators: 2x IntesisBox activity (Tx, Rx)
• Operating Temperature: 0°C to 70°C
• Stock Temperature: -40°C to 85°C
• Operating Humidity: 5% to 95% RH, non-condensing
• Stock Humidity: 5% to 95% RH, non-condensing
• Isolation voltage: 1500 VDC
• Isolation resistance: 1000 MΩ
• Protection: IP20 (IEC60529)

Warranty: 36 months

---