IAP2300C-2A22-1T-1D-P12_36 EOL

Industrial wireless client with 1 100M LAN port, 1 3IN1 serial port and 2 IO ports (reserved).

IAP2300C-2A22-1T-1D-P12_36 is a 100M industrial wireless client. This product provides 1 100M LAN port, 1 3IN1 serial port, 2 IO ports (reserved) and 2 2.4G antenna interfaces. It also adopts rail or wall mounting, which can meet the requirements of different application scenes.

The network management system supports dual link working mode and IEEE802.11b/g/n wireless technology. The maximum rate of the whole machine can reach 150Mbps, which meets the demand of fast data transmission. Each serial port supports 4 TCP or UDP session connections, supporting RealCom, TCP Server, TCP Client, UDP Server, UDP Client and other working modes; The device supports single link fast roaming and double link seamless roaming. In a wireless local area network composed of multiple APs, seamless roaming can be realized without AP switching operation.

The RESET button can realize WLAN debugging and one-key factory default restoration. The hardware adopts fanless, low power consumption, wide temperature, wide pressure design, through strict testing in line with industry standards, can adapt to the harsh requirements of the industrial site environment, can be widely used in the robot industry: sorting robot, small freight robot, etc.

Features:

• Support dual link working mode
• Support 802.11r-based single-link fast roaming and dual-link seamless roaming technology
• Support 300bps-115200bps line speed and non-blocking communication
• Support a variety of serial working modes : RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast and other operating modes
• -40~75℃ large range operating temperature
• Strong anti-interference ability and high defensiveness, which can adapt to all kinds of severe environments easily

Specification:

Standard & Protocol

• IEEE 802.3 for 10Base-T
• IEEE802.3u for 100Base-TX
• IEEE 802.3ab for 1000Base-T
• IEEE802.11b/g/n for WLAN
• IEEE802.11i for wireless security
• IEEE802.11r for fast roaming

Working mode

• Dual-link mode

Radio Frequency

• 802.11b/g/n: 2.412GHz~2.4835GHz
• RF power output: 20dBm
• Modulation methods: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM

Receiving sensitivity

• 802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7
• 802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7
• 802.11g: -91dBm@6Mbps, -72dBm@54Mbps
• 802.11b: -93dBm@1Mbps, -87dBm@11Mbps

Transmitting power

• 802.11n_HT40: 20dBm@MCS0, 20dBm@MCS7
• 802.11n_HT20: 20dBm@MCS0, 20dBm@MCS7
• 802.11g: 20dBm@6Mbps, 20dBm@54Mbps
• 802.11b: 20dBm@1Mbps, 20dBm@11Mbps

Interface

• LAN port: 1 10/100Base-T(X) RJ45 port
• 1 3IN1 serial port +2 IO ports (reserved) : 2*5 pin terminal blocks
• Console port: CLI command management port(RS-232), RJ45
• Antenna: 2 RP-SMA-K type (Female) interfaces

Power Supply

• 12~36VDC, Support anti - reverse connection, 3-pin 5.08mm pitch terminal blocks

Power Consumption (high temperature)

• No-load: 2.9W@24VDC
• Full-load: 4.2W@24VDC

Indicator

• Device running status indicator, power connection status indicator, COM indicator, IO indicator, LAN port connection indicator, signal strength indicator

Working Environment

• Operating temperature: -40~75℃
• Storage temperature:-40~85℃
• Relative humidity: 5%～95% (no condensation)

Physical Characteristic

• Housing: IP40 protection, metal
• Installation: DIN-Rail or wall mounting
• Weight: 322g
• Dimension (W x H x D): 35mm×110mm×85mm

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
• Air discharge: ±8kV
• Contact discharge: ±6kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3
• Power supply: ±2kV
• Ethernet port: ±1kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6

MTBF

• >1 million hours

Warranty: 3 years

Certificates: CE, FCC, RoHS

---